Pioneer AVD-W6010 owner manual Selecting the Source, About the Corner Icons, Built-in speaker icon

Basic Operation

Selecting the Source

You can switch the selected sources of three icons simultaneously, or switch them sepa- rately.

About the Corner Icons

The following icons are displayed in the upper left corner of the Screen.

Icons indicate the selected sources.

VCR 1

VCR 1

The upper icons are selected with the SEL/POWER button.

The lower icons are selected independently.

VO L 1 2

Display icon:

Indicates the video on the display.

Built-in speaker icon:

Indicates the audio output from the built-in speaker of this unit.

(When you switch MIXING ON, this icon is turned red.) (Refer to page 18.)

RCA output icon:

Indicates the video and audio output from the RCA output jack of the hide-away unit.

Icons condition	Button for source change
	SEL/POWER button

For RCA output, you can only switch the source with the

SEL/POWER button.

V.SEL button

Press the V.SEL button for 2 seconds to switch only the dis- play out of three sources; display, built-in speaker and RCA output. To return to the setting for selecting all source at the same time, press the V.SEL button again for 2 seconds.

SP.SEL button

Press the SP.SEL button for 2 seconds to switch only the built-in speaker audio out of three sources: display, built-in speaker and RCA output. To return to the setting for selecting all source at the same time, press SP.SEL button again for 2 seconds.

Note:

•After selecting the source with the V.SEL button or the SP.SEL button, you won’t be able to switch the display or built-in speaker’s audio with the SEL/POWER button until each mode is canceled.

9