Axis Communications M7014 user manual Installing a PTZ driver, OSD Menu

Page 24

AXIS M7014 Video Encoder

PTZ (Pan Tilt Zoom)

Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls.

Note

Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement.

Installing a PTZ driver

This Axis product supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to obtain the correct driver. To install a PTZ device you need to install the PTZ driver.

To install the PTZ driver go to PTZ> Driver Selection. Browse to find the driver (e.g. driver.ptz) and Upload. If the driver was successfully uploaded, it appears in the Select driver to use drop-down list. From this drop-down list, select the driver to install or remove, and click Save.

Select Activate PTZ to enable PTZ. The address of the connected device appears against Device ID. Choose the Device type from the drop-down list. To find which device type to use, consult the documentation supplied by the PTZ driver.

To complete the installation go to System Options > Ports & Devices > COM Port (see ) and verify the settings.

OSD Menu

If the PTZ unit supports an internal configuration menu, this can be accessed using the On-Screen Display (OSD). Configure the analog camera by opening and navigating through its internal menu in this display.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Axis M7014 Video Encoder About this document Legal ConsiderationsLiability Intellectual Property RightsSupport Learn MoreTable of Contents Axis M7014 Video EncoderConnectors and Buttons Hardware OverviewHardware Overview LED Indicators SD Card SlotControl Button Color IndicationAccessing the Product Accessing the ProductAccess from a Browser Accessing the Product Access from the Internet Set the Root PasswordNetwork TCP/IP Advanced Click Use HttpsLive View Controls on the Live ViewAxis Media Control viewer toolbar PTZ ControlsPreset Positions, on How to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M7014 Video Encoder Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterQuad stream Image264 Camera Settings Image SettingsVideo Stream Profiles Image AppearanceVideo Overlay Overlay ImageGo to Video Video Stream and select the Image tab Go to Video Overlay ImageUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Live View Config Live View ConfigDefault live view video Default Viewer for Browsers Viewer SettingsUser Defined Links Browser Viewer DescriptionPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomDevice Settings PTZ Pan Tilt Zoom Guard TourAdvanced LimitsInstalling a PTZ driver OSD MenuDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersGo to Detectors Motion Detection Parameter Object Size History Sensitivity DescriptionDefault values Medium level 50%Low level 0% Recommended valuesEvents EventsSetting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Setting Up an Email Recipient Events RecipientsRecipient Use with action Go to Events Recipients and click AddSchedules RecurrencesGo to Events Schedules and click Add Go to Events Recurrences and click AddRecordings RecordingsRecording List Continuous RecordingLanguages LanguagesSystem Options System OptionsSecurity UsersIeee CertificatesGo to System Options Security Ieee Basic TCP/IP Settings Date & TimeNetwork Go to System Options Security CertificatesIPv4 Address Configuration IPv6 Address ConfigurationAxis Internet Dynamic DNS Service ARP/PingAdvanced TCP/IP Settings DNS ConfigurationNTP Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPQoS Quality of Service UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Storage BonjourSD Card Network ShareMaintenance SupportSupport Overview System OverviewPlain Config Logs & ReportsScripting File UploadSystem Options Reset to Factory Default Settings Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Status and Network indicator LEDs are flashing red rapidly Video and image problems, generalVideo Camera Settings Storage and disk management problemsTechnical Specifications Technical SpecificationsConnectors RS-485/422 Connector Performance ConsiderationsFunction Pin M3.2

M7014 specifications

The Axis Communications M7014 is a state-of-the-art video encoder designed to enhance the capabilities of existing analog cameras by integrating them into modern IP-based video surveillance systems. This encoder facilitates the transition from traditional surveillance infrastructure to more advanced and flexible IP solutions, making it an ideal choice for organizations looking to modernize their security setups.

One of the main features of the M7014 is its ability to encode video in multiple formats, including H.264 and Motion JPEG. H.264 is particularly valued for its efficient compression capabilities, allowing high-quality video to be transmitted using less bandwidth, which is essential for optimizing storage and network resources. The encoder supports a resolution of up to 720p, ensuring clear and detailed footage that can be crucial for identifying individuals or events.

The M7014 offers four channels, enabling users to connect and manage multiple analog cameras simultaneously. This multi-channel capability is perfect for businesses needing extensive coverage over different areas without the need to invest in multiple encoders. Additionally, the encoder provides two-way audio capabilities, allowing for real-time communication between the monitoring center and the field, which adds an extra layer of security and operational efficiency.

Incorporating advanced video analytics, the M7014 supports functionalities such as motion detection and audio detection, which trigger alerts and notifications in case of suspicious activities. This proactive approach ensures that security personnel are immediately informed about potential threats, enabling timely responses.

Moreover, the M7014 is designed with ease of installation and integration in mind. It features Power over Ethernet (PoE), reducing the need for additional power cables and simplifying the setup process. This technology also allows for remote management and configuration, making it easier for users to monitor and adjust settings from various locations.

Furthermore, the device is equipped with Axis' unique One-Click Cloud capability, which allows for seamless connection to cloud services, enhancing the flexibility and scalability of the surveillance system. The M7014 is also compatible with a variety of video management software, ensuring that users can choose a platform that best meets their operational needs.

In summary, the Axis Communications M7014 is a powerful and versatile video encoder designed to support the transition from analog to IP surveillance. With its multi-channel capabilities, efficient video compression, advanced analytics, and user-friendly features, it represents a valuable addition to any security infrastructure, enhancing surveillance effectiveness while streamlining operations.
Top Page Image Contents