Axis Communications M7014 user manual Set Up Motion Detection Windows, Motion Detection Parameters

Page 26

AXIS M7014 Video Encoder

Detectors

Note

•Using the motion detection feature may decrease the product’s overall performance.

•The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window.

Set Up Motion Detection Windows

To set up a motion detection Include Window, follow these instructions:

1.Go to Detectors > Motion Detection.

2.Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name.

3.Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired position) of the window.

4.Adjust the Object Size, History and Sensitivity profile sliders (see Motion Detection Parameters for details). Any detected motion within an active window is indicated by red peaks in the Activity window.

5.Click Save.

To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the include window.

To delete an include or exclude window, select the window in the list of windows and click Del.

Motion Detection Parameters

The parameters controlling motion detection are described in the table below:

Parameter

Object Size

History

Sensitivity

 

 

 

 

Description

Object size relative to window

Object memory length.

Difference in luminance

 

size.

 

between background and

 

 

 

object.

 

 

 

 

High level (100%)

Only very large objects trigger

An object that appears in

Ordinary colored objects on

 

motion detection.

the window triggers motion

ordinary backgrounds trigger

 

 

detection for a long time

motion detection.

 

 

before it is considered as

 

 

 

non-moving.

 

 

 

 

 

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Axis M7014 Video Encoder Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M7014 Video EncoderHardware Overview Connectors and ButtonsHardware Overview Control Button LED IndicatorsSD Card Slot Color IndicationAccess from a Browser Accessing the ProductAccessing the Product Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Click Use HttpsAxis Media Control viewer toolbar Live ViewControls on the Live View PTZ ControlsPreset Positions, on Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M7014 Video Encoder Basic Setup Setting Up the ProductSetting Up the Product Video Stream VideoVideo Pixel Counter264 Quad streamImage Video Stream Profiles Camera SettingsImage Settings Image AppearanceGo to Video Video Stream and select the Image tab Video OverlayOverlay Image Go to Video Overlay ImageGo to Events Action Rules Using Overlay Text in an Action RulePrivacy Mask Default live view video Live View ConfigLive View Config User Defined Links Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAdvanced Device SettingsPTZ Pan Tilt Zoom Guard Tour LimitsInstalling a PTZ driver OSD MenuCamera Tampering DetectorsDetectors Motion DetectionGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionLow level 0% Default valuesMedium level 50% Recommended valuesEvents EventsGo to Events Action Rules and click Add Setting Up an Action RulePTZ Control Recipient Use with action Setting Up an Email RecipientEvents Recipients Go to Events Recipients and click AddGo to Events Schedules and click Add SchedulesRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersGo to System Options Security Ieee IeeeCertificates Network Basic TCP/IP SettingsDate & Time Go to System Options Security CertificatesAxis Internet Dynamic DNS Service IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPUPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM RTP/H.264SD Card StorageBonjour Network ShareSupport Overview MaintenanceSupport System OverviewScripting Plain ConfigLogs & Reports File UploadSystem Options Reset to Factory Default Settings Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Basic Product is accessible locally but not externallyProblems with streaming H.264 Video Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Storage and disk management problemsTechnical Specifications Technical SpecificationsConnectors Function Pin RS-485/422 ConnectorPerformance Considerations M3.2

M7014 specifications

The Axis Communications M7014 is a state-of-the-art video encoder designed to enhance the capabilities of existing analog cameras by integrating them into modern IP-based video surveillance systems. This encoder facilitates the transition from traditional surveillance infrastructure to more advanced and flexible IP solutions, making it an ideal choice for organizations looking to modernize their security setups.

One of the main features of the M7014 is its ability to encode video in multiple formats, including H.264 and Motion JPEG. H.264 is particularly valued for its efficient compression capabilities, allowing high-quality video to be transmitted using less bandwidth, which is essential for optimizing storage and network resources. The encoder supports a resolution of up to 720p, ensuring clear and detailed footage that can be crucial for identifying individuals or events.

The M7014 offers four channels, enabling users to connect and manage multiple analog cameras simultaneously. This multi-channel capability is perfect for businesses needing extensive coverage over different areas without the need to invest in multiple encoders. Additionally, the encoder provides two-way audio capabilities, allowing for real-time communication between the monitoring center and the field, which adds an extra layer of security and operational efficiency.

Incorporating advanced video analytics, the M7014 supports functionalities such as motion detection and audio detection, which trigger alerts and notifications in case of suspicious activities. This proactive approach ensures that security personnel are immediately informed about potential threats, enabling timely responses.

Moreover, the M7014 is designed with ease of installation and integration in mind. It features Power over Ethernet (PoE), reducing the need for additional power cables and simplifying the setup process. This technology also allows for remote management and configuration, making it easier for users to monitor and adjust settings from various locations.

Furthermore, the device is equipped with Axis' unique One-Click Cloud capability, which allows for seamless connection to cloud services, enhancing the flexibility and scalability of the surveillance system. The M7014 is also compatible with a variety of video management software, ensuring that users can choose a platform that best meets their operational needs.

In summary, the Axis Communications M7014 is a powerful and versatile video encoder designed to support the transition from analog to IP surveillance. With its multi-channel capabilities, efficient video compression, advanced analytics, and user-friendly features, it represents a valuable addition to any security infrastructure, enhancing surveillance effectiveness while streamlining operations.
Top Page Image Contents