Axis Communications M7014 user manual Maintenance, Support Overview, System Overview

Page 42

AXIS M7014 Video Encoder

System Options

To add a network share:

1.Go to System Options > Storage.

2.Click Network Share.

3.Enter the IP address, DNS or Bonjour name to the host server in the Host field.

4.Enter the name of the share in the Share field. Sub folders cannot be used.

5.If required, select The share requires login and enter the user name and password.

6.Click Connect.

To clear all recordings and data from the Axis product’s folder on the designated share, click Clear under Storage Tools.

To avoid filling the share, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock under Recording Settings.

Maintenance

The Axis product provides several maintenance functions. These are available under System Options > Maintenance.

Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings.

Click Restore to reset most settings to the factory default values. The following settings are not affected:

•the boot protocol (DHCP or static)

•the static IP address

•the default router

•the subnet mask

•the system time

•the IEEE 802.1X settings

Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default using the control button, see Reset to Factory Default Settings, on page 44.

For information about firmware upgrade, see Upgrading the Firmware, on page 45.

Support

Support Overview

The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance.

See also Troubleshooting, on page 45.

System Overview

To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview. Information that can be found here includes firmware version, IP address, network and security settings, event settings, image settings and recent log items. Many of the captions are links to the proper Setup page.

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Axis M7014 Video Encoder Liability About this documentLegal Considerations Intellectual Property RightsSupport Learn MoreTable of Contents Axis M7014 Video EncoderConnectors and Buttons Hardware OverviewHardware Overview Control Button LED IndicatorsSD Card Slot Color IndicationAccessing the Product Accessing the ProductAccess from a Browser Network TCP/IP Advanced Accessing the Product Access from the InternetSet the Root Password Click Use HttpsAxis Media Control viewer toolbar Live ViewControls on the Live View PTZ ControlsPreset Positions, on Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M7014 Video Encoder Setting Up the Product Setting Up the ProductBasic Setup Video Stream VideoVideo Pixel CounterQuad stream Image264 Video Stream Profiles Camera SettingsImage Settings Image AppearanceGo to Video Video Stream and select the Image tab Video OverlayOverlay Image Go to Video Overlay ImageUsing Overlay Text in an Action Rule Privacy MaskGo to Events Action Rules Live View Config Live View ConfigDefault live view video User Defined Links Default Viewer for BrowsersViewer Settings Browser Viewer DescriptionPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomAdvanced Device SettingsPTZ Pan Tilt Zoom Guard Tour LimitsInstalling a PTZ driver OSD MenuCamera Tampering DetectorsDetectors Motion DetectionGo to Detectors Motion Detection Set Up Motion Detection WindowsMotion Detection Parameters Parameter Object Size History Sensitivity DescriptionLow level 0% Default valuesMedium level 50% Recommended valuesEvents EventsSetting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Recipient Use with action Setting Up an Email RecipientEvents Recipients Go to Events Recipients and click AddGo to Events Schedules and click Add SchedulesRecurrences Go to Events Recurrences and click AddRecording List RecordingsRecordings Continuous RecordingLanguages LanguagesSecurity System OptionsSystem Options UsersIeee CertificatesGo to System Options Security Ieee Network Basic TCP/IP SettingsDate & Time Go to System Options Security CertificatesAxis Internet Dynamic DNS Service IPv4 Address ConfigurationIPv6 Address Configuration ARP/PingNTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 FTPUPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM RTP/H.264SD Card StorageBonjour Network ShareSupport Overview MaintenanceSupport System OverviewScripting Plain ConfigLogs & Reports File UploadSystem Options Reset to Factory Default Settings Emergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with streaming H.264Basic Video Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Storage and disk management problemsTechnical Specifications Technical SpecificationsConnectors RS-485/422 Connector Performance ConsiderationsFunction Pin M3.2

M7014 specifications

The Axis Communications M7014 is a state-of-the-art video encoder designed to enhance the capabilities of existing analog cameras by integrating them into modern IP-based video surveillance systems. This encoder facilitates the transition from traditional surveillance infrastructure to more advanced and flexible IP solutions, making it an ideal choice for organizations looking to modernize their security setups.

One of the main features of the M7014 is its ability to encode video in multiple formats, including H.264 and Motion JPEG. H.264 is particularly valued for its efficient compression capabilities, allowing high-quality video to be transmitted using less bandwidth, which is essential for optimizing storage and network resources. The encoder supports a resolution of up to 720p, ensuring clear and detailed footage that can be crucial for identifying individuals or events.

The M7014 offers four channels, enabling users to connect and manage multiple analog cameras simultaneously. This multi-channel capability is perfect for businesses needing extensive coverage over different areas without the need to invest in multiple encoders. Additionally, the encoder provides two-way audio capabilities, allowing for real-time communication between the monitoring center and the field, which adds an extra layer of security and operational efficiency.

Incorporating advanced video analytics, the M7014 supports functionalities such as motion detection and audio detection, which trigger alerts and notifications in case of suspicious activities. This proactive approach ensures that security personnel are immediately informed about potential threats, enabling timely responses.

Moreover, the M7014 is designed with ease of installation and integration in mind. It features Power over Ethernet (PoE), reducing the need for additional power cables and simplifying the setup process. This technology also allows for remote management and configuration, making it easier for users to monitor and adjust settings from various locations.

Furthermore, the device is equipped with Axis' unique One-Click Cloud capability, which allows for seamless connection to cloud services, enhancing the flexibility and scalability of the surveillance system. The M7014 is also compatible with a variety of video management software, ensuring that users can choose a platform that best meets their operational needs.

In summary, the Axis Communications M7014 is a powerful and versatile video encoder designed to support the transition from analog to IP surveillance. With its multi-channel capabilities, efficient video compression, advanced analytics, and user-friendly features, it represents a valuable addition to any security infrastructure, enhancing surveillance effectiveness while streamlining operations.
Top Page Image Contents