JVC KD-SH909 manual Radio Basic Operations, Listening to the radio, Start searching a station

RADIO BASIC OPERATIONS

ENGLISH

EB

E-BASS DISP BAND MODE

MP3

INPUT

Listening to the radio 2 Start searching a station.

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station automatically: Auto search

1 Select FM or AM.

1 Press SOURCE repeatedly to select FM or AM as the source.

2If necessary, press

	BAND (B) repeatedly
BAND	to select the FM band
	number. Each time
	you press the button,
	the FM band changes
	as follows:
F 1	F 2	F 3
(FM 1)	(FM 2)	(FM 3)

Selected band appears.

Press ¢ to search stations of higher frequencies.

Press 4 to search stations of lower frequencies.

When a station is received, searching stops.

To stop searching before a station is received,

press the same button you have pressed for

searching.

To tune in to FM stations only with strong signals

1Press MODE (M) to enter the functions mode while listening to an FM broadcast.

2Press LO (local) while still in the functions mode, so that the LOCAL indicator lights up on the display.

This function works only while searching FM stations, including SSM preset.

Each time you press the button, the LOCAL indicator lights up and goes off alternately.

Notes:

•This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

•If a name has been assigned to the station (see page 35), the assigned name appears on the upper line of the main display. The STATION indicator also lights up.

10