JVC KD-SH909 manual To set the clock display Clock, To turn the key-touch tone on or off

ENGLISH

To set the clock display – CLOCK

You can set the clock to be shown on the display when the unit is turned on.

When shipped from the factory, the clock is set to be shown on the display.

• ON:	Clock display is turned on.
• OFF:	Clock display is turned off.

To turn the key-touch tone on or off

– BEEP SW

You can deactivate the key-touch tone if you do not want it to beep each time you press a button. When shipped from the factory, the key-touch tone is activated.

• ON:	Activates the key-touch tone.
• OFF:	Deactivates the key-touch tone.

To select the level meter – LEVEL/EQ

You can select the level display according to your preference.

When shipped from the factory, this mode is set to “LEVEL 1.”

• EQ: Equalizer pattern is displayed.

•LEVEL 1: Audio level meter appears.

•LEVEL 2: Peak level meter appears.

•LEVEL 3: Display illumination starts.

To select the dimmer mode – DIMMER

When you turn on the car head lights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer mode is activated.

•AUTO: Activates Auto Dimmer.

•OFF: Cancels Auto Dimmer.

• ON: Always dims the display.

Note:

Auto Dimmer equipped for this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

To turn the power amplifier switch on or off

– P.AMP SW

You can switch off the built-in amplifier and send the audio signals only to the external amplifier(s) to get clear sounds and to prevent internal heat buildup inside this unit.

When shipped from the factory, the power amplifier switch is turned on so that the built-in amplifier works.

•	ON:	Select this mode when not using
		external amplifier(s).
•	OFF:	Select this mode when using
		external amplifier(s).

To adjust the display contrast level

– CONTRAST

You can adjust the display contrast level among 01 (dark) to 10 (bright). When shipped from the factory, the display contrast level is set at level 05.

To select the scroll mode – SCROLL

You can select the scroll mode for the disc information (when it cannot be shown at a time). When shipped from the factory, Auto Scroll mode is set to “ONCE.”

•ONCE: Scrolls only once.

•AUTO: Repeats the scroll (5-second intervals in between).

• OFF: Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP (D) for more than 1 second.

32