JVC KD-SH909 manual Prohibiting disc ejection, To play back only intros Intro scan

To play back the current track repeatedly (One Track Repeat Play)

You can play back the current track repeatedly.

1Press MODE (M) while

playing a disc. The unit

MODE enters the functions mode.

2Press RPT (repeat) while still in the functions mode, so

that the “REPEAT” flashes on the display.

Then, each time you press RPT, One Track Repeat Play turns on and off alternately. When One Track Repeat Play is turned off, All Track Repeat Play is activated.

RPT (repeat) indicator

RPT

When the repeat mode is turned on, the RPT indicator lights up on the display.

To play back only intros (Intro scan)

You can play back the first 15 seconds of each track sequentially.

	1 Press MODE (M) while
MODE	playing a disc. This unit
	enters the functions mode.

2 Press INT (intro scan) while still in the functions mode, so that “INTRO” flashes on

4 the display.

Then, each time you press INT, intro scan play mode turns on and off alternately.

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc in the loading slot.

While pressing SEL (select), press and hold 0 for more than 2 seconds.

“NO EJECT” flashes on the display for about 5 seconds, and the disc is locked and cannot be ejected.

Note:

If you press 0while disc ejection is prohibited, the control panel moves down, but the disc cannot be ejected.

To return the display panel to its previous position, press 0.

To cancel the prohibition and unlock the disc,

press and hold 0 for more than 2 seconds again, while pressing SEL (select).

“EJECT OK” flashes on the display for about 5 seconds, and the disc is unlocked.

ENGLISH

•During intro scan play, track numbers flash.

•When the intro scan play ends, normal playback resumes.

17