JVC KD-SH909 manual To change the FM tuner selectivity, Aux, If Filter

	To turn the auxiliary input switch on or off
ENGLISH
	– AUX IN
	You can switch the auxiliary input off when no
	external component is connected to the MP3
	INPUT jack.
	When shipped from the factory, the auxiliary input
	switch is set to “ON.”
	• ON:	You can select “AUX INPUT
		(AUX)” as the playback source.
	• OFF:	You cannot select “AUX INPUT
		(AUX)” as the playback source.

To select the target component to operate through this receiver – KEY SEL

(For KD-SH909 only)

You can operate either JVC’s DVD player or VCR through this receiver, by using the number buttons on the control panel.

When shipped from the factory, these number buttons are set to be used for the DVD operations.

• DVD:	To operate a JVC DVD player.
• VCR:	To operate a JVC VCR.
• OFF:	Not to use the number buttons for
	operating other components.

To use these number buttons on the control panel for DVD or VCR operations, see pages 38 and 39.

To change the FM tuner selectivity

– IF FILTER

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard. This unit has been preset to automatically reduce this interference noise (“AUTO”) when shipped from the factory.

•AUTO: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

•WIDE: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To turn the tag display on or off – TAG DISP

An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). This unit is compatible only with ID3v1.

When shipped from the factory, “ON” is selected.

•	ON:	Turns on the ID3 tag display while
		playing MP3 files.
		• If an MP3 file does not have ID3
		tags, directory name and file name
		appear.
		Note:
		If you change the setting from “OFF” to
		“ON” while playing an MP3 file, the tag
		display will be activated when the next
		file stars playing.
•	OFF:	Turns off the ID3 tag display while
		playing MP3 files. (Only the directory
		name and file name can be shown.)

34