JVC KD-SH909 manual FM station automatic preset SSM, Manual preset

ENGLISH

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

•Manual preset of both FM and AM stations

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons

—No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM

band (FM1, FM2 and FM3).

1 Select the FM band (FM1 – 3) you want to store FM stations into.

1 Press SOURCE repeatedly to select FM.

2 If necessary, press BAND (B) repeatedly to select the FM band.

BANDEach time you press the button, the FM band changes as follows:

F 1	F 2	F 3
(FM 1)	(FM 2)	(FM 3)

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.

1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).

1	Press SOURCE
	repeatedly to select
	FM as the source.
2	If necessary, press
	BAND (B) repeatedly
	to select FM1. Each
BAND	time you press the
	button, the FM band
	changes as follows:

2 Press and hold both buttons for more	F 1	F 2	F 3
than 2 seconds.	(FM 1)	(FM 2)	(FM 3)

“SSM” appears, then disappears when automatic preset is over.

12