Alpine CDA-W560EG Recalling the Equalizer Curve, Adjusting and Storing the Equalizer Curve

Page 23

Recalling the Equalizer Curve

1 Press AUDIO TUNE.

2 Press / or - within 15 seconds, select the EQ mode, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

B-FOCUS T-CORR

(BSF) (TCR)

EQ LPF HPF

3 Press / or - within 15 seconds, select the SELECT mode, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

4 Press / or - within 15 seconds, select the desired equalizer characteristics, and press -/J / ENT. to set.

The mode that is blinking at the centre of the display is the selected mode.

5 Repeat Step 4 to set another band.

LOW MID-LOW MID-HIGH HIGH

(60Hz) (150Hz) (2.5kHz) (10kHz)

6 When finished with the settings, press / or -, select EXIT, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

•Selection of CONTINUE will cause a return to the ADJUST mode.

•Selection of P-MEMORY will set the storage mode of the adjustment values.

(See “Storing Adjustment Contents”)

7 Press AUDIO TUNE to return to the normal mode.

•This function is inoperable when DEFEAT is ON (See Page 5).

•Please give consideration to the frequency response of the connected speakers when making adjustments.

*The level can be adjusted to ±12dB with 3dB steps.

“Level 9: +12dB” “Level 7: +6dB” “Level 5:

0dB (FLAT)” “Level 3: –6dB” “Level 1: –12dB”

Storing Adjustment Contents

FLAT(OFF)

POPS

ROCK

NEWS

P-1~P-3

Flat frequency

Suppress midrange

Emphasize lows and highs

Boost midrange and suppress highs and lows

Calls the adjustment values stored in the PRESET number.

1 Following above-mentioned Step 6 within 15 seconds, press / or - to select P-MEMORY, then press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

2 Press / or - within 15 seconds, select one of “PRESET 1” to “PRESET 3”, and press -/J / ENT..

This will store the adjusted contents in the selected PRESET number.

5 Press AUDIO TUNE to return to the normal mode.

Adjusting and Storing the Equalizer Curve

1 Press AUDIO TUNE.

2 Press / or - within 15 seconds, select the EQ mode, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

B-FOCUS T-CORR

(BSF) (TCR)

EQ LPF HPF

3 Press / or - within 15 seconds, select the ADJUST mode, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

4 Press / or - within 15 seconds to adjust the LOW level (1 to 9)*, then press -/J / ENT. to set.

3 Press AUDIO TUNE to return to the normal mode.

•The contents stored in presets 1 to 3 will be maintained even when the unit is reset or the battery power cable is disconnected.

•The stored contents can be called using the “Recalling the Equalizer Curve” operation.

21-EN

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CDA-W560E CDA-W560EG CHA-S634 CHA-1214 CHM-S630 Alpine CD Changers Give You MoreContents Operating Instructions Excessively Thin Tape Correct Handling Audio Mute Function Turning Power On and OffBasic Operation Initial System Start-UpCD-DA ONLY/CD-DA About SetupPress FUNCTION/SETUP to select Setup mode X. Random Play CD OperationScanning Programmes Playback CDQuick Search Repeat PlaySearching from CD Text File/Folder Search MP3/WMA OperationPlaying MP3/WMA Files Selecting FoldersCD-DA only CD-DA & MP3/WMA 44.1kHZPlaying MP3/WMA Data RPT ONE RPT Fldr RPT ALL* RPT OFF Press / or to select the M.I.X. mode, then press ENTPress / or to select the Repeat mode, then press -/J / ENT Press / or to select the RPT mode, then press ENTAbout MP3/WMA Terminology Dolby B NR Noise Reduction Cassette Player OperationPlayback Cassette Manual ReverseProgramme Sensor P.S To cancel, select Repeat OFF with the above procedureTo cancel, select B.SKIP OFF with the above procedure Blank Skip B.SKIPMemo A-MEMO Automatic Memory of Station PresetsListening to Radio Controlling CD Changer Tuning to Preset StationsCD Changer Operation Optional Station Title Search FunctionPress Title About Indicator DisplayTitle/Text Operation Displaying the Title/TextScroll Auto Scroll Manual Scroll SettingTitling Discs/Stations Erasing Disc Title/Station TitleLPF Setting the Low Pass Filter Sound SettingSetting the MX Mode Adjusting the HPF/LPFRecalling the Equalizer Curve Adjusting and Storing the Equalizer CurveStoring Adjustment Contents Tips Subwoofer speaker About the Time CorrectionExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsPress Audio Tune and return to the normal mode Setting the Bass FocusExample of Steps 3 and 4 Setting Calling the Stored Time Correction Value Time Correction Adjustment and Storage/ CallingStoring the Adjustment Contents Sound Guide Function Setting TimeOther Functions Displaying TimeDemonstration Function Switching the Tuner ModeAdjusting Display Contrast Dimmer ControlSubwoofer On and Off Setting the AUX Mode V-LinkSetting Tone Defeat for External Devices Turning Mute Mode On/OffRadio InformationCase of Difficulty BasicTape playback sounds dull CassetteIndication for CD Head Unit Indication for CD ChangerUSE only in Cars with a 12 Volt Negative Ground Installation and ConnectionsInstallation InstallationConnections Ignition BatteryTo prevent external noise from entering the audio system Aerial Receptacle Power Aerial Lead BlueSpecifications
Top Page Image Contents