Cassette
Tape playback sounds dull.
•The tape head needs cleaning.
-Clean the tape head.
•Incorrect Dolby NR in use.
-Check Dolby NR switch setting.
Indication for CD Head Unit
HIGH-TEMP
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
NO DISC
•No CD is inserted. - Insert a CD.
ERROR
•Mechanism error.
1)Press CD c to eject the CD.
If not ejecting, consult your Alpine dealer.
2)When the error indication remains after ejecting, press CD c again.
If the error indication still does not turn off after pressing CD c for a few times, consult your Alpine dealer.
•When the "ERROR" is displayed:
In case that the disc cannot be ejected by pressing CD c, press the Reset switch (refer to page 5) and press CD c again.
If not ejecting, consult your Alpine dealer.
PROTECT
•A
- You can only play back
UNSUPPORT
•The disc is not written in a MP3/WMA supported format. - Use a disc written at the MP3/WMA supported format.
Indication for CD Changer
•Protective circuit is activated due to high temperature.
-The indicator will disappear when the temperature returns to within operation range.
ERROR-01
•Malfunction in the CD Changer.
-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine dealer.
•Magazine ejection not possible.
-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.
ERROR-02
•A disc is left inside the CD Changer.
-Press the Eject button to activate the eject function. When the CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.
NO MAGZINE
•No magazine is loaded into the CD Changer. - Insert a magazine.
NO DISC
•No indicated disc.
- Choose another disc.