Alpine CDA-W560EG owner manual Terminology

Page 15

Order of tracks

The unit plays the files in the order that the writing software writes them. Therefore, the playing order may not be the same as the order you input. The playback order of the folders and files is as follows. However, the folder and file playback order differs from the folder no. and file no. indicated on the display.

 

1

 

 

1

 

 

2

 

 

3

2

 

3

 

 

4

 

 

 

4

 

5

5

 

6

 

Folder

MP3/WMA File

 

Terminology

Bit rate

This is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files.

Sampling rate

This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data.

Encoding

Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format.

Tag

Song information such as track titles, artist names, album names, etc., written into MP3/WMA files.

MP3: ID3 tag

WMA: WMA tag

Root folder

The root folder is found at the top of the file system. The root folder contains all folders and files.

13-EN

Image 15
Contents CDA-W560E CDA-W560EG CHA-S634 CHA-1214 CHM-S630 Alpine CD Changers Give You MoreContents Operating Instructions Excessively Thin Tape Correct Handling Audio Mute Function Turning Power On and OffBasic Operation Initial System Start-UpAbout Setup Press FUNCTION/SETUP to select Setup modeCD-DA ONLY/CD-DA X. Random Play CD OperationScanning Programmes Playback CDRepeat Play Searching from CD TextQuick Search File/Folder Search MP3/WMA OperationPlaying MP3/WMA Files Selecting Folders44.1kHZ Playing MP3/WMA DataCD-DA only CD-DA & MP3/WMA RPT ONE RPT Fldr RPT ALL* RPT OFF Press / or to select the M.I.X. mode, then press ENTPress / or to select the Repeat mode, then press -/J / ENT Press / or to select the RPT mode, then press ENTAbout MP3/WMA Terminology Dolby B NR Noise Reduction Cassette Player OperationPlayback Cassette Manual ReverseProgramme Sensor P.S To cancel, select Repeat OFF with the above procedureTo cancel, select B.SKIP OFF with the above procedure Blank Skip B.SKIPAutomatic Memory of Station Presets Listening to RadioMemo A-MEMO Controlling CD Changer Tuning to Preset StationsCD Changer Operation Optional Station Title Search FunctionPress Title About Indicator DisplayTitle/Text Operation Displaying the Title/TextScroll Auto Scroll Manual Scroll SettingTitling Discs/Stations Erasing Disc Title/Station TitleLPF Setting the Low Pass Filter Sound SettingSetting the MX Mode Adjusting the HPF/LPFAdjusting and Storing the Equalizer Curve Storing Adjustment ContentsRecalling the Equalizer Curve Tips Subwoofer speaker About the Time CorrectionExample 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsSetting the Bass Focus Example of Steps 3 and 4 SettingPress Audio Tune and return to the normal mode Time Correction Adjustment and Storage/ Calling Storing the Adjustment ContentsCalling the Stored Time Correction Value Sound Guide Function Setting TimeOther Functions Displaying TimeDemonstration Function Switching the Tuner ModeAdjusting Display Contrast Dimmer ControlSubwoofer On and Off Setting the AUX Mode V-LinkSetting Tone Defeat for External Devices Turning Mute Mode On/OffRadio InformationCase of Difficulty BasicTape playback sounds dull CassetteIndication for CD Head Unit Indication for CD ChangerUSE only in Cars with a 12 Volt Negative Ground Installation and ConnectionsInstallation InstallationConnections Ignition BatteryTo prevent external noise from entering the audio system Aerial Receptacle Power Aerial Lead BlueSpecifications