Alpine CDA-W560E Time Correction Adjustment and Storage/ Calling, Storing the Adjustment Contents

Page 26

Time Difference Table

Number of

Time

Number of

Time

Number of

Time

Difference

Difference

Difference

Steps

(ms)

Steps

(ms)

Steps

(ms)

 

 

 

 

 

 

0

0.0

14

1.4

28

2.8

 

 

 

 

 

 

1

0.1

15

1.5

29

2.9

 

 

 

 

 

 

2

0.2

16

1.6

30

3.0

 

 

 

 

 

 

3

0.3

17

1.7

31

3.1

 

 

 

 

 

 

4

0.4

18

1.8

32

3.2

 

 

 

 

 

 

5

0.5

19

1.9

33

3.3

 

 

 

 

 

 

6

0.6

20

2.0

34

3.4

 

 

 

 

 

 

7

0.7

21

2.1

35

3.5

 

 

 

 

 

 

8

0.8

22

2.2

36

3.6

 

 

 

 

 

 

9

0.9

23

2.3

37

3.7

 

 

 

 

 

 

10

1.0

24

2.4

38

3.8

 

 

 

 

 

 

11

1.1

25

2.5

39

3.9

 

 

 

 

 

 

12

1.2

26

2.6

40 - 98

4.0 - 9.8

 

 

 

 

 

 

13

1.3

27

2.7

99

9.9

Time Correction Adjustment and Storage/ Calling

Before performing the following procedures, refer to “About the Time Correction” (page 22).

1 Press AUDIO TUNE.

2 Press / or - within 15 seconds, select the time correction adjustment mode, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

B-FOCUS T-CORR

(BSF) (TCR)

EQ LPF HPF

3 Press / or - within 15 seconds, select the ADJUST mode, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

4 Press / or - within 15 seconds to adjust the time

correction value (0.0 to 9.9) of the first speaker (F-L), then press -/J / ENT. to set.

5 Repeat Step 4 and set another speaker.

F-L F-R R-L R-R

6 When finished with the settings, press / or -, select EXIT, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

•Selection of CONTINUE will cause a return to the time correction adjustment mode.

•Selection of P-MEMORY will set the storage mode of the adjustment value. (See “Storing the Adjustment Contents”.)

7 Press AUDIO TUNE to return to the normal mode.

•The adjustment value in the time correction adjustment is also reflected in the Bass Focus mode.

Storing the Adjustment Contents

1 Following Step 6 mentioned on the left within 15 seconds, press / or - to select P-MEMORY, then press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

2 Press / or - within 15 seconds, select one of “PRESET 1” to “PRESET 6,” and press -/J / ENT..

This will store the adjusted contents in the selected PRESET number.

3 Press AUDIO TUNE to return to the normal mode.

•The contents stored in presets 1 to 6 will be maintained even when the unit is reset or the battery power cable is disconnected.

Calling the Stored Time Correction Value

1 Following Step 3 mentioned on the left, press / or -, select the SELECT mode, and press -/J / ENT..

The mode that is blinking at the centre of the display is the selected mode.

2 Press / or - within 15 seconds, select one of “PRESET 1” to “PRESET 6,” and press -/J / ENT..

This will call the stored adjustment contents.

24-EN

Page 25 Page 27
Image 26
Page 25 Page 27
Contents CDA-W560E CDA-W560EG Alpine CD Changers Give You More CHA-S634 CHA-1214 CHM-S630Contents Operating Instructions Excessively Thin Tape Correct Handling Initial System Start-Up Turning Power On and OffBasic Operation Audio Mute FunctionCD-DA ONLY/CD-DA About SetupPress FUNCTION/SETUP to select Setup mode Playback CD CD OperationScanning Programmes X. Random PlayQuick Search Repeat PlaySearching from CD Text Selecting Folders MP3/WMA OperationPlaying MP3/WMA Files File/Folder SearchCD-DA only CD-DA & MP3/WMA 44.1kHZPlaying MP3/WMA Data Press / or to select the RPT mode, then press ENT Press / or to select the M.I.X. mode, then press ENTPress / or to select the Repeat mode, then press -/J / ENT RPT ONE RPT Fldr RPT ALL* RPT OFFAbout MP3/WMA Terminology Manual Reverse Cassette Player OperationPlayback Cassette Dolby B NR Noise ReductionBlank Skip B.SKIP To cancel, select Repeat OFF with the above procedureTo cancel, select B.SKIP OFF with the above procedure Programme Sensor P.SMemo A-MEMO Automatic Memory of Station PresetsListening to Radio Station Title Search Function Tuning to Preset StationsCD Changer Operation Optional Controlling CD ChangerDisplaying the Title/Text About Indicator DisplayTitle/Text Operation Press TitleErasing Disc Title/Station Title Scroll SettingTitling Discs/Stations Scroll Auto Scroll ManualAdjusting the HPF/LPF Sound SettingSetting the MX Mode LPF Setting the Low Pass FilterRecalling the Equalizer Curve Adjusting and Storing the Equalizer CurveStoring Adjustment Contents Example 2. Listening Position All Seats About the Time CorrectionExample 1. Listening Position Front Left Seat Tips Subwoofer speakerPress Audio Tune and return to the normal mode Setting the Bass FocusExample of Steps 3 and 4 Setting Calling the Stored Time Correction Value Time Correction Adjustment and Storage/ CallingStoring the Adjustment Contents Displaying Time Setting TimeOther Functions Sound Guide FunctionDimmer Control Switching the Tuner ModeAdjusting Display Contrast Demonstration FunctionTurning Mute Mode On/Off Setting the AUX Mode V-LinkSetting Tone Defeat for External Devices Subwoofer On and OffBasic InformationCase of Difficulty RadioIndication for CD Changer CassetteIndication for CD Head Unit Tape playback sounds dullInstallation and Connections USE only in Cars with a 12 Volt Negative GroundInstallation InstallationIgnition Battery ConnectionsAerial Receptacle Power Aerial Lead Blue To prevent external noise from entering the audio systemSpecifications
Top Page Image Contents