Alpine CDA-W560EG owner manual Installation

Page 33

Installation

Caution concerning the installation location

1 Before installing, check to make sure that the taking out and inserting of the disc will not interfere with operation of the gear shift.

Cassette tape

2 Angle of installation

Install at an angle of between horizontal and 35˚. Note that installing at an angle outside of this range will result in a loss of performance and possibly damage.

0 – 35˚

Installation

Secure the ground lead of the unit to a clean metal spot using a screw

(*) already attached to the car's chassis.

Attach the Original Mounting Bracket to each side of the CDA- W560E, using the screws supplied with CDA-W560E.

Screws (M5⋅8) (Included)

Ground Lead

Mounting Bracket

Chassis

31-EN

Image 33

Contents CDA-W560E CDA-W560EG CHA-S634 CHA-1214 CHM-S630 Alpine CD Changers Give You MoreContents Operating Instructions Excessively Thin Tape Correct Handling Basic Operation Turning Power On and OffInitial System Start-Up Audio Mute FunctionAbout Setup Press FUNCTION/SETUP to select Setup modeCD-DA ONLY/CD-DA Scanning Programmes CD OperationPlayback CD X. Random PlayRepeat Play Searching from CD TextQuick Search Playing MP3/WMA Files MP3/WMA OperationSelecting Folders File/Folder Search44.1kHZ Playing MP3/WMA DataCD-DA only CD-DA & MP3/WMA Press / or to select the Repeat mode, then press -/J / ENT Press / or to select the M.I.X. mode, then press ENTPress / or to select the RPT mode, then press ENT RPT ONE RPT Fldr RPT ALL* RPT OFFAbout MP3/WMA Terminology Playback Cassette Cassette Player OperationManual Reverse Dolby B NR Noise ReductionTo cancel, select B.SKIP OFF with the above procedure To cancel, select Repeat OFF with the above procedureBlank Skip B.SKIP Programme Sensor P.SAutomatic Memory of Station Presets Listening to RadioMemo A-MEMO CD Changer Operation Optional Tuning to Preset StationsStation Title Search Function Controlling CD ChangerTitle/Text Operation About Indicator DisplayDisplaying the Title/Text Press TitleTitling Discs/Stations Scroll SettingErasing Disc Title/Station Title Scroll Auto Scroll ManualSetting the MX Mode Sound SettingAdjusting the HPF/LPF LPF Setting the Low Pass FilterAdjusting and Storing the Equalizer Curve Storing Adjustment ContentsRecalling the Equalizer Curve Example 1. Listening Position Front Left Seat About the Time CorrectionExample 2. Listening Position All Seats Tips Subwoofer speakerSetting the Bass Focus Example of Steps 3 and 4 SettingPress Audio Tune and return to the normal mode Time Correction Adjustment and Storage/ Calling Storing the Adjustment ContentsCalling the Stored Time Correction Value Other Functions Setting TimeDisplaying Time Sound Guide FunctionAdjusting Display Contrast Switching the Tuner ModeDimmer Control Demonstration FunctionSetting Tone Defeat for External Devices Setting the AUX Mode V-LinkTurning Mute Mode On/Off Subwoofer On and OffCase of Difficulty InformationBasic RadioIndication for CD Head Unit CassetteIndication for CD Changer Tape playback sounds dullUSE only in Cars with a 12 Volt Negative Ground Installation and ConnectionsInstallation InstallationConnections Ignition BatteryTo prevent external noise from entering the audio system Aerial Receptacle Power Aerial Lead BlueSpecifications