Alpine CDA-W560EG Subwoofer On and Off, Setting the AUX Mode V-Link, Turning Mute Mode On/Off

Page 29

External Device

Subwoofer On and Off

1 Press FUNCTION/SETUP to select the SETUP mode*.

*See “About SETUP” on Page 6.

2 Press / or - to select the SUBW. ON or OFF mode.

3 Press -/J / ENT. to set SUBW. ON.

SUBW. ON SUBW. OFF

(Initial setting)

4 After completing the setting, press FUNCTION/ SETUP to return to the normal mode.

5 Press Rotary encoder to select the SUBW. mode.

SUBW. BALANCE FADER

VOLUME DEFEAT

Press gor fafter selecting the Subwoofer mode, and the subwoofer output phase is toggled “NORMAL (PHASE 0°)” or “REVERSE (PHASE 180°).”

6 Turn the Rotary encoder within 5 seconds and adjust the level (0 to +15) of the subwoofer.

•Once the mode is selected, failure to perform an operation within 5 seconds will result in cancellation of the adjustment mode.

•The subwoofer output is a monaural output.

Setting the AUX Mode (V-Link)

You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA- 410C) to this component.

1 Press FUNCTION/SETUP to select the SETUP mode*.

*See “About SETUP” on Page 6.

2 Press / or - to select the AUX IN mode.

3 Press -/J / ENT. to set to ON.

AUX IN OFF AUX IN ON

(Initial setting)

•After setting AUX IN to ON, use / or - to select the AUX display selection, then press -/J / ENT. which will allow setting of the AUX mode “display.”

4 When the setting is completed, press FUNCTION/ SETUP to return to the normal mode.

5 Press SOURCE/POWER to select the AUX (external input) mode.

*1

TUNER TAPE CD CHANGER AUX

(*1: Only when the changer is connected)

•When using the Versatile Link Terminal (KCA-410C), you can connect two external inputs. To select the mode, press BAND on the unit.

Setting Tone Defeat for External Devices

When inputting external devices to this unit, turning tone defeat on will bypass EQ and MX, i.e., sound for external devices is output at the default setting.

1 Press FUNCTION/SETUP to select the SETUP mode*.

*See “About SETUP” on Page 6.

2 Press / or - to select the INT AUDIO mode. 3 Press -/J / ENT. to set INT AUDIO ON.

INT AUDIO OFF INT AUDIO ON

(Initial setting)

4 When the setting is completed, press FUNCTION/ SETUP to return to the normal mode.

Turning Mute Mode On/Off

If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.

1 Press FUNCTION/SETUP to select the SETUP mode*.

*See “About SETUP” on Page 6.

2 Press / or - to select the INT MUTE mode. 3 Press -/J / ENT. to set INT MUTE OFF.

INT MUTE ON INT MUTE OFF

(Initial setting)

4 When the setting is completed, press FUNCTION/ SETUP to return to the normal mode.

27-EN

Page 28 Page 30
Image 29
Page 28 Page 30
Contents CDA-W560E CDA-W560EG CHA-S634 CHA-1214 CHM-S630 Alpine CD Changers Give You MoreContents Operating Instructions Excessively Thin Tape Correct Handling Basic Operation Turning Power On and OffInitial System Start-Up Audio Mute FunctionCD-DA ONLY/CD-DA About SetupPress FUNCTION/SETUP to select Setup mode Scanning Programmes CD OperationPlayback CD X. Random PlayQuick Search Repeat PlaySearching from CD Text Playing MP3/WMA Files MP3/WMA OperationSelecting Folders File/Folder SearchCD-DA only CD-DA & MP3/WMA 44.1kHZPlaying MP3/WMA Data Press / or to select the Repeat mode, then press -/J / ENT Press / or to select the M.I.X. mode, then press ENTPress / or to select the RPT mode, then press ENT RPT ONE RPT Fldr RPT ALL* RPT OFFAbout MP3/WMA Terminology Playback Cassette Cassette Player OperationManual Reverse Dolby B NR Noise ReductionTo cancel, select B.SKIP OFF with the above procedure To cancel, select Repeat OFF with the above procedureBlank Skip B.SKIP Programme Sensor P.SMemo A-MEMO Automatic Memory of Station PresetsListening to Radio CD Changer Operation Optional Tuning to Preset StationsStation Title Search Function Controlling CD ChangerTitle/Text Operation About Indicator DisplayDisplaying the Title/Text Press TitleTitling Discs/Stations Scroll SettingErasing Disc Title/Station Title Scroll Auto Scroll ManualSetting the MX Mode Sound SettingAdjusting the HPF/LPF LPF Setting the Low Pass FilterRecalling the Equalizer Curve Adjusting and Storing the Equalizer CurveStoring Adjustment Contents Example 1. Listening Position Front Left Seat About the Time CorrectionExample 2. Listening Position All Seats Tips Subwoofer speakerPress Audio Tune and return to the normal mode Setting the Bass FocusExample of Steps 3 and 4 Setting Calling the Stored Time Correction Value Time Correction Adjustment and Storage/ CallingStoring the Adjustment Contents Other Functions Setting TimeDisplaying Time Sound Guide FunctionAdjusting Display Contrast Switching the Tuner ModeDimmer Control Demonstration FunctionSetting Tone Defeat for External Devices Setting the AUX Mode V-LinkTurning Mute Mode On/Off Subwoofer On and OffCase of Difficulty InformationBasic RadioIndication for CD Head Unit CassetteIndication for CD Changer Tape playback sounds dullUSE only in Cars with a 12 Volt Negative Ground Installation and ConnectionsInstallation InstallationConnections Ignition BatteryTo prevent external noise from entering the audio system Aerial Receptacle Power Aerial Lead BlueSpecifications
Top Page Image Contents