Setup
Joystick
GENERAL Setup
General Setup Operation
To display the General mode screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the General mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the General mode screen.”
The following steps 1 to 5 are common operations to each “Setting item” of GENERAL Setup. Refer to each section for details.
1 Press and hold MUTE/RTN/SETUP for at least 2 seconds.
The SETUP screen is displayed.
2 Press the joystick up or down to select GENERAL SETUP, then press the joystick right.
The GENERAL SETUP screen is displayed.
Display Example for GENERAL SETUP Screen
3 Press the joystick up or down to select the desired item.
Setting items:
DEMO / CLOCK TYPE / CLOCK ADJ / DAYLIGHT TIME / BEEP / REACTOR / SCROLL AUTO
4 Press the joystick left or right to adjust and set the desired item.
5 Press MUTE/RTN/SETUP to return to the previous screen. Press MUTE/RTN/SETUP repeatedly to return to the main source screen displayed before starting the setup operation.
•Select SETUP on the FUNCTION screen to recall the SETUP screen after pressing and holding 
/MENU/FUNC. for at least 2 seconds.
•Immediately after changing the settings of General Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed.
Demonstration Function
This unit is equipped with a demonstration function capable of showing basic operations of respective sources on the monitor display.
Setting item: DEMO
Setting content: OFF / ON
ON: Turns on the demonstration mode to show the basic operations.
OFF: Turns off the demonstration mode.
•The demonstration operation is automatically repeated until the function is turned off.
Setting the Time Display
The time display type can be set.
Setting item: CLOCK TYPE
Setting content: OFF / 12H / 24H
12H: Clock indication is displayed for 12 hours.
24H: Clock indication is displayed for 24 hours.
OFF: Clock indication is turned off.