To display the DVD mode screen
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3While the parking brake is being engaged the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the DVD mode operation has been released. Engaging the parking brake can reactivate the DVD mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the DVD mode screen.”
•If you try to activate the auxiliary device while driving, the display will show the
Caution
•Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.
•If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen: 
1Press SOURCE/POWER.
The source selection screen is displayed.
2Press the joystick up or down to select the DVD
mode (EXT.DVD or DVD CHANGER, etc.), then press 
/
/ENTER.
Playback starts.
If a menu screen appears
On DVDs and Video CDs with playback control (PBC), menu screens may appear automatically. The DVD menu can be controlled by the commander supplied with the unit. If this happens, perform the operation described below to start playback.
Press the joystick up, down, left or right to select an item, then press and hold 
/
/ENTER for at least 2 seconds.
•Press MUTE/RTN/SETUP to return to the previous screen.
•The Video CD menu screen cannot be controlled from the commander supplied with the unit.
•Depending on the disc, the menu screen may be recalled from the
FUNCTION screen. Select MENU on the FUNCTION screen and
press 
/
/ENTER to recall the menu, after displaying the FUNCTION screen by pressing and holding 
/MENU/FUNC. for at least 2 seconds.
Playing Still Frames (Pausing)
1 During playback, press 
/
/ENTER.
2 Press 
/
/ENTER to resume playback.
Finding the Beginnings of Chapters or Tracks
During playback, press 
or 
.
The chapter/track switches each time the button is pressed, and playback of the selected chapter/track starts.
: Press this to start playback from the beginning of the following chapter or track.
: Press this to start playback from the beginning of the current chapter or track.
•Some DVDs do not have chapters.
Supplementary explanation
“Chapters” are divisions of movies or musical selections on DVDs.
“Tracks” are divisions of movies or musical selections on video and music CDs.
Fast-forwarding/Fast-reversing
1 During playback, press and hold 
or 
2 Release 
or 
to return to normal playback.