Switching a Source
1 Press SOURCE/POWER.
The source selection screen is displayed.
Screen example
Displays source modes that can be selected
(The kind of source modes that are displayed varies depending on connection and setting)
2 Press the joystick up or down to select the desired source, then press 
/
/ENTER.
The selected main source screen is displayed.
•In the source selection screen mode, press MUTE/RTN/SETUP to return to the previous screen.
Adjusting the Volume
Turn the flipper switch clockwise or counterclockwise to adjust the volume.
Clockwise: Volume up
Counterclockwise: Volume down
Volume: 0 - 35
Lowering Volume Quickly
Activating this function will instantly lower the volume level.
Press MUTE/RTN/SETUP to activate the MUTE mode.
The audio level decreases.
During mute, the volume level indicator will blink.
Pressing MUTE/RTN/SETUP again brings the audio back to its previous level.
Radio
Joystick
This unit cannot receive HD Radio™ signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the
Band display
Preset number display
Frequency display
Listening to Radio
1 Press SOURCE/POWER.
The source selection screen is displayed.
2 Press the joystick up or down to select RADIO, then press 
/
/ENTER.
3 Press and hold 
for at least 2 seconds repeatedly until the desired radio band is displayed.
AM 
4 Press 
/
/ENTER to select the tuning mode.
DX SEEK | SEEK | (OFF) | DX SEEK |
•The initial mode is Distance mode.
DX SEEK (Distance mode):
Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).
SEEK (Local mode):
Only strong stations will be automatically tuned in (Automatic Seek Tuning).
OFF (Manual mode):
The frequency is manually tuned in steps (Manual tuning).