Alpine VPA-B222 owner manual 53-EN

Page 55

Antenna Extension Cable

Right Front (+) Speaker Input Lead (Gray) Right Front (–) Speaker Input Lead (Gray/Red) Left Front (+) Speaker Input Lead (White)

Left Front (–) Speaker Input Lead (White/Red) Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.

Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.

Illumination Lead (Orange)

This lead may be connected to the vehicle's instrument cluster illumination lead. This will allow the backlighting of the commander to dim whenever the vehicle's lights are turned on.

Guide Control Lead (White/Green)

If an external audio processor is connected, connect this to the guide control lead.

Commander (Included)

Power Supply Connector

Steering Remote Control Interface Connector

To steering remote control interface box.

Remote Control Eye Jack

Connect this to the remote control sensor unit.

Factory System Input Terminal

Navigation Input (RGB Input) Terminal

Connect this to the RGB output terminal of the Navigation System.

Display Output (RGB Output) Terminal

Connect a 13P RGB terminal equipped monitor using the RGB cable supplied with the unit.

Video Output Terminal

Connect this to the external front monitor using the RCA extension cable supplied with the unit.

Subwoofer output Terminal

Connect the input lead of an amplifier for the subwoofer to this terminal.

Rear output Terminal

Use when connecting an amplifier or equalizer.

Front output Terminal

Use when connecting an amplifier or equalizer.

Ai-NET Connector

Connect this to the output or input connector of other product (CD changer, Equalizer, etc.) equipped with Ai-NET.

Guide Output Terminal

If an external audio processor is connected, outputs the navigation interrupt voice signal that is input from the Alpine navigation system, or the speaker input terminal.

Commander Terminal

iPod Direct Connector

Control iPod signals.

Connect this to an iPod, using the (also separately sold) FULL SPEED™ Connection Cable (KCE-422i).

AV Select Connector

When this connector is connected to the optional expansion box (VPE-S431), connect this to the HEAD UNIT terminal of VPE-S431.

AUX Input Terminals

If these terminals are connected to the optional expansion box (VPE-S431), the AUX input terminals are not used on this unit. Connect AUX IN 1, 2 and 3, and the AUX OUT 1 and 2 terminals of the expansion box (VPE-S431) to the external device(s).

Antenna Receptacle

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

Audio Interrupt In Lead (Pink/Black)

Parking Brake Lead (Yellow/Blue)

Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the VPA-B222.

Foot Brake Lead (Yellow/Black)

Connect to the vehicle's foot brake lead or brake lamp lead.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

Fuse Holder (10A)

Ground Lead (Black)

Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.

Right Front (+) Speaker Output Lead (Gray) Right Front (–) Speaker Output Lead (Gray/Black) Right Rear (–) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet)

Left Rear (+) Speaker Output Lead (Green)

Left Rear (–) Speaker Output Lead (Green/Black) Left Front (–) Speaker Output Lead (White/Black) Left Front (+) Speaker Output Lead (White)

System Switch

When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

•Be sure to turn the power off on the unit before changing the switch position.

ALPINE/OTHER switching button

Set to “ALPINE” for normal use.

Set to “OTHER” when connecting optional display interface box.

53-EN

Page 54 Page 56
Image 55
Page 54 Page 56
Contents VPA-B222 CHA-1214CHM-S630 CHA-S634Contents Operating Instructions CD/MP3/WMA Operation Optional Installation Connections Operating Instructions Precautions Initial System Start-Up Feature Accessory ListTurning Power On or Off Getting StartedRadio Switching a SourceAdjusting the Volume Lowering Volume QuicklySetting Analog Mode HD Radio mode only Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset StationsPress and hold MUTE/RTN/SETUP for at least 2 seconds Other Useful FeaturesChanging the Display HD Radio mode only Adjusting the AudioSetting the Bass Control Adjusting the BalanceAdjusting the Fader Setting the Treble Control11-EN Switching the function of the remote sensorSystem Setup screen is displayed Rear Entertainment FunctionDemonstration Function SetupGeneral Setup Operation Setting the Time DisplaySystem Setup Operation Using the Speaker Input Connecting an External Input Device AUX Connecting the NavigationSetting the Others Connecting the Rear MonitorConnecting a Subwoofer Setting the CommanderPlaying CD/MP3/WMA Adjusting the display positionSetting the Auxiliary Data Field Display CD/MP3/WMA Operation Optional18-EN Folder/File SearchX. Random Play Repeat PlayPlaying DVD/Video CD When Repeat is displayed Press / /ENTERRepeat mode is changed DVD/Video CD Operation OptionalFast-forwarding/Fast-reversing Playing Still Frames PausingTo display the DVD mode screen Finding the Beginnings of Chapters or TracksStopping Playback PRE Stop Changing Discs only when DVD changer is connectedSwitching the Audio Tracks Displaying the Top Menu Screen DVD onlyMonitor display Switching the Angle DVD onlySwitching from the disc menu 22-ENChanging the Display Tuning in to Categorized ProgramsSAT Radio Receiver Optional Receiving Channels with the SAT Receiver24-EN Storing Channel PresetsChecking the SAT Radio ID Number Receiving Stored ChannelsReceiving Weather or Traffic Information from SAT Radio IPod OptionalCategory/Channel Search Function Storing Weather or Traffic information from SAT RadioSearching by album name Searching for a desired SongSearching by Playlist Searching by artist name27-EN Select Playlist/Artist/AlbumRandom Play Shuffle M.I.X Searching by Song NameMenu Screen Function Navigation System OptionalDisplaying the Navigation Screen Map Screen FunctionOperating TV Unit Automatic Memory of Channel PresetsSwitching Audio TV Operation OptionalExternal input screen is displayed Auxiliary Device OptionalOperating Auxiliary Devices Optional 30-ENListening to Music of HDD Operating Factory System Speaker Input modeFactory System HDD Player Operation OptionalExternal Audio Processor Optional Adjustment Procedure for Dolby Surround32-EN AP Setup screen is displayed Setting the SpeakersSet MX Mode of the External Audio Processor Over Adjustment34-EN Check that Defeat mode is offTo adjust other channels, repeat steps 7 Performing Time Correction Manually TCRAdjustable level -9 to +9 Phase SwitchingGraphic Equalizer Adjustments Parametric Equalizer AdjustmentsSetting Bass Focus Setting Bass Sound ControlSpeaker Setup Setting Bass CompressorAdjusting the speaker levels Setting of Dolby DigitalAdjusting the acoustic image Achieving powerful high volume soundUsing the Pro Logic II Mode Adjusting the DVD LevelStoring Settings in the Memory Calling up the Preset Memory39-EN Linear PCM SettingSoft button operation Basic operationRadio Operation Setup Operation40-EN DVD/Video CD Operation CD/MP3/WMA Operation41-EN 42-EN SAT Radio OperationEnters the selected playlist/artist/album/song IPod Operation43-EN Stored weather or traffic channel is recalled44-EN TV Operation HDD Player OperationCase of Difficulty Information45-EN Indication for iPod Mode Indication for SAT Receiver Mode46-EN Commander Specifications47-EN 48-EN Installation and Connections49-EN InstallationInstalling the unit When mounting with Velcro fastenersMount the Holder Mounting the Commander50-EN PatternParking Brake Lead Connection Connection Diagram of Spst Switch Sold SeparatelyIf the ACC power supply is not available 51-EN52-EN Connections VPA-B222 Wiring Diagram53-EN RCA Extension Cable Included System Example54-EN Connect the Alpine Monitor55-EN Guide Control Lead White/Green Ai-NET ConnectorRCA Extension Cable Included with DVD video player 56-EN When Connecting External Equipment57-EN To Ai-NET Connector Black To Ai-NET Connector GrayTo AV Selector Terminal Connect the car system standard audio system, etc 58-EN
Top Page Image Contents