Setting the Speakers
1 Check that Defeat mode is off (page 10).
2 Press and hold MUTE/RTN/SETUP for at least 2 seconds.
The SETUP screen is displayed.
3 Press the joystick up or down to select AP SETUP, then press the joystick right.
The AP SETUP screen is displayed.
4 Press the joystick up or down to select SPEAKER SEL, then press the joystick right.
5 Press the joystick left or right to set the connected speaker.
FRONT1: OFF/FULL (Full Range)/TW (Tweeter)
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
6 Repeat step 4 and 5 to set all other speakers.
7 Press MUTE/RTN/SETUP to return to the previous screen.
•Set any unconnected speakers to OFF.
•Settings above can be carried out even when the speaker is set to OFF in “Speaker Setup” (page 36).
•To use the subwoofer in MONO with
6 Press the joystick up or down to select the media that is being played back. Then press the joystick left or right to set the desired MX mode.
MX CD (OFF, CD 1 to 3)
CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity.
MX COMPM (OFF, CMPM 1 to 3) / MX SAT (OFF, SAT 1 to 3)
This corrects information that was omitted at the time of compression. This reproduces a
MX FM (OFF, FM 1 to 3)
The medium to high frequencies become more clear, and produces well balanced sound in all the bands.
MX DVD (OFF, MOVIE 1 to 2)
The dialog portion of the video is reproduced more clearly.
(MUSIC)
This disk contains a large quantity of data, such as a music clip. MX uses this data to reproduce the sound accurately.
MX AUX 1 to 3 (OFF, CMPM, MOVIE, MUSIC)
Choose the MX mode (CMPM, MUSIC, or MOVIE) that corresponds to the media connected.
7 Press MUTE/RTN/SETUP to return to the previous screen.
•The contents of MX set here is reflected in
•When OFF is selected, MX effect of each MX mode will be OFF.
•Each music source, such as radio, CD, and MP3 can have its own MX setting.
•MX mode does not function when MX is ON for AM radio.
•MX COMPM is applied for MP3/WMA, MMD, iPod.
•MX SAT is applied for XM, SIRIUS, HD Radio.
•MX mode can only be set for media currently playing back.
•AUX3 can be set only when the optional expansion box
Set MX Mode of the External Audio Processor
Before performing the operations below, set MX (Media Xpander) mode of the
1 Check that Defeat mode is off (page 10).
2 Press and hold MUTE/RTN/SETUP for at least 2 seconds.
The SETUP screen is displayed.
3 Press the joystick up or down to select AP SETUP, then press the joystick right.
The AP SETUP screen is displayed.
4 Press the joystick up or down to select MX, then press joystick left or right to select ON.
5 Press the joystick up or down to select MX SETUP, then press the joystick right.
X-OVER Adjustment
1 Check that Defeat mode is off (page 10).
2 Press and hold MUTE/RTN/SETUP for at least 2 seconds.
The SETUP screen is displayed.
3 Press the joystick up or down to select AP SETUP, then press the joystick right.
The AP SETUP screen is displayed.
4 Press the joystick up or down to select
5 Press the joystick left or right to select L/R or L+R.
6 Press the joystick up or down to select
7 Press the joystick up or down to select the desired speaker, then press the joystick right.