Alpine CVA-1003R owner manual Turning Loudness On and Off, Audio Mute Function, → Vol → Bal → Fad

Page 11

Adjusting Volume/Balance

(Between Left and Right)/Fader

(Between Front and Rear)

1 Press the MODE button repeatedly to choose the desired mode.

Each press changes the modes as follows:

→ VOL → BAL → FAD

NOTES

•If the 5 or 6 button is not pressed in 5 seconds after selecting the BALANCE, or FADER mode, the unit automatically returns to the VOLUME mode.

•If the subwoofer is ON, its level can also be adjusted using the MODE button.

2 Press the 5 and 6 buttons until the desired sound is obtained in each mode.

Turning Loudness On and Off

Loudness introduces a special low- and high- frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound.

1 Press and hold the LOUD button for at least

2 seconds to activate or deactivate the loudness mode.

The display shows "LOUD" when the loudness mode is activated.

NOTE

When connecting an external audio processor to the unit, you cannot use this function.

Basic Operation

Audio Mute Function

Activating this function will instantly lower the volume level by 20 dB.

1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB.

Pressing the MUTE button again will bring the audio back to its previous level.

NOTE

When an external interruption (e.g., vehicle phone) happens, the display shows as follows:

The monitor display: INT.

The sub display: INTERRUPT

This function is only available when the Interrupt lead of the Auxiliary device is connected to the unit.

9-EN

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Initial System Start-Up Basic OperationDetaching the Front Panel Attaching the Front PanelRaising the Monitor Turning Power On and OffSelecting the Monitors Opening Position Adjusting the Monitor Viewing AngleLowering the Monitor → VOL → BAL → FAD Turning Loudness On and OffAudio Mute Function Radio Operation Manual TuningAutomatic Seek Tuning Example of Radio mode ScreenTuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsReceiving RDS Regional Local Stations Recalling Preset RDS StationsPI Seek Setting → Light M → Classics → Other M PTY Programme Type TuningPress the T.INFO button to activate the normal mode Receiving Traffic InformationPriority PTY Programme Type When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Displaying Radio Text Music Sensor Skip Example of CD Mode ScreenCD Player/Changer Operation Optional Playing Optional CD Player or Changer→ RPT → RPT ALL → off Fast Forward and BackwardRepeat Play → Repeat → Repeat ALL → offScanning Programmes X. Random PlayIt is possible to title your favourite CDs Titling DiscsControlling CD Changer When a 12-disc CD Changer is connectedErasing Disc Title Multi-Changer Selection Playing Mini-Disc MD Music Sensor Skip Example of MD Mode ScreenMD Player Operation Optional 24-EN Fast Forward/Backward Playing DVD/Video CD/CDStill/Pause Chapter DVD/Track Video CD SensorPlayback starts Repeat Play Controlling DVD ChangerDVD Video CD/CDNavigation System Operation Optional Turning on the Navigation ModeAbout Title and Text Displaying the Title/TextMD mode Other Useful FeaturesExample of sub display Setting the Bass ControlPress the g DN or f UP button to adjust the selected mode Operation with the monitor display closedEach time you press the Preset 2 button, the blinking shifts Setting the Treble ControlExample of Setup Screen Switching PhaseIllumination Control Adjusting Brightness of PictureAdjusting Colour of Picture Switching the Background Screen Adjusting Tint of PictureSetting Automatic Opening/ Closing of Monitor CD Text/MD Title Scroll SettingTurning Sound Guide Function On or Off Setting the Clock DisplayNAV. Setting TimeDisplaying Time Selecting Rear MonitorSwitching NTSC/PAL Setting Setting the External InputPress the g DN or f UP button to select Switching the Tuner ModeDesired setting Subwoofer Control On and OffSetting the External Expansion Box Interrupt Feature MIX LevelRecalling Stored Settings Switching Disc ModeSwitching Display Modes AUX2 NAV Simultaneous OperationRadio AUX ∗ NAV RadioOperation with the Monitor Display Closed Case of Difficulty InformationMonitor display Sub display HI-TEMPMonitor Section SpecificationsPrecautions Installation and ConnectionsRemoval InstallationInstallation using the vehicles Factory brackets LocationCVA-1003R If the ACC power supply is not availableTo prevent external noise from entering the audio system Antenna ISO Antenna Plug Basic ConnectionsBattery Lead Yellow Switched Power Lead Ignition RedRemote Control Output Lead White/Brown Power Antenna Lead BlueAmplifier System Example 1 Refer also to Basic ConnectionsAUX Video Input AUX1 Connector Rear/Subwoofer Output RCA ConnectorsAi-NET Connector 54-EN Ground Lead Black RCA Extension Cable Sold Separetely Ai-NET ConnectorPower Supply Connector

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents