Alpine CVA-1003R owner manual Specifications, Monitor Section

Page 48

Information

Specifications

MONITOR SECTION

Screen Size

6.5"

LCD Type

Transparent type TN LCD

Operation System

TFT active matrix

Number of Picture Elements

336,960 pcs. (1,440 234)

Effective Number of Picture Elements

 

99.99% or more

Illumination System

U-shaped cold cathode

 

fluorescent tube

CHASSIS SIZE

Width

178 mm (7")

Height

50 mm (2")

Depth

165 mm (6-1/2")

NOSEPIECE SIZE

 

Width

170 mm (6–3/4")

Height

46.2 mm (1-13/16")

Depth

20.5 mm (13/16")

FM TUNER SECTION

Tuning Range

87.5 – 108.0 MHz

Mono Usable Sensitivity

0.7 µV

Alternate Channel Selectivity

90 dB

Signal-to-Noise Ratio

65 dB

Stereo Separation

35 dB

MW TUNER SECTION

 

Tuning Range

531 – 1,602 kHz

Sensitivity (IEC Standard)

25.1 µV/28 dB

NOTES

Due to continuous product improvement, specifications and design are subject to change without notice.

The LCD panel is manufactured using an extremely high precision manufacturing technology. Its effective pixel ratio is over 99.99%. This means that there is a possibility that 0.01% of the pixels could be either always ON or OFF.

LW TUNER SECTION

Tuning Range

153 – 281 kHz

Sensitivity (IEC Standard)

31.6 µV/30 dB

GENERAL

 

Power Requirement

14.4 V DC

 

(11–15 V allowable)

Operating Temperature

+32°F to +113°F

 

(0°C to + 45°C)

Maximum Power Output

45 W 4

Maximum Pre-Output Voltage

2 V/10 k ohms

Bass

±14 dB at 60 Hz

Treble

±14 dB at 10 kHz

Weight

2.2 kg (4 lbs. 14 oz)

46-EN

Image 48
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Basic Operation Detaching the Front PanelAttaching the Front Panel Initial System Start-UpTurning Power On and Off Raising the MonitorAdjusting the Monitor Viewing Angle Lowering the MonitorSelecting the Monitors Opening Position Turning Loudness On and Off Audio Mute Function→ VOL → BAL → FAD Manual Tuning Automatic Seek TuningExample of Radio mode Screen Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationRecalling Preset RDS Stations PI Seek SettingReceiving RDS Regional Local Stations PTY Programme Type Tuning Press the T.INFO button to activate the normal modeReceiving Traffic Information → Light M → Classics → Other MWhen traffic information stations cannot be received Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type Displaying Radio Text Example of CD Mode Screen CD Player/Changer Operation OptionalPlaying Optional CD Player or Changer Music Sensor SkipFast Forward and Backward Repeat Play→ Repeat → Repeat ALL → off → RPT → RPT ALL → offX. Random Play Scanning ProgrammesTitling Discs It is possible to title your favourite CDsWhen a 12-disc CD Changer is connected Erasing Disc TitleControlling CD Changer Multi-Changer Selection Example of MD Mode Screen MD Player Operation OptionalPlaying Mini-Disc MD Music Sensor Skip 24-EN Playing DVD/Video CD/CD Still/PauseChapter DVD/Track Video CD Sensor Fast Forward/BackwardRepeat Play Controlling DVD Changer DVDVideo CD/CD Playback startsTurning on the Navigation Mode Navigation System Operation OptionalDisplaying the Title/Text About Title and TextOther Useful Features MD modeSetting the Bass Control Press the g DN or f UP button to adjust the selected modeOperation with the monitor display closed Example of sub displaySetting the Treble Control Each time you press the Preset 2 button, the blinking shiftsSwitching Phase Example of Setup ScreenAdjusting Brightness of Picture Adjusting Colour of PictureIllumination Control Adjusting Tint of Picture Switching the Background ScreenCD Text/MD Title Scroll Setting Setting Automatic Opening/ Closing of MonitorSetting the Clock Display Turning Sound Guide Function On or OffSetting Time Displaying TimeSelecting Rear Monitor NAV.Setting the External Input Switching NTSC/PAL SettingSwitching the Tuner Mode Desired settingSubwoofer Control On and Off Press the g DN or f UP button to selectInterrupt Feature MIX Level Setting the External Expansion BoxSwitching Disc Mode Switching Display ModesRecalling Stored Settings Simultaneous Operation Radio AUX ∗ NAVRadio AUX2 NAVOperation with the Monitor Display Closed Information Case of DifficultyHI-TEMP Monitor display Sub displaySpecifications Monitor SectionInstallation and Connections PrecautionsInstallation Installation using the vehicles Factory bracketsLocation RemovalIf the ACC power supply is not available To prevent external noise from entering the audio systemCVA-1003R Basic Connections Antenna ISO Antenna PlugSwitched Power Lead Ignition Red Remote Control Output Lead White/BrownPower Antenna Lead Blue Battery Lead YellowSystem Example 1 Refer also to Basic Connections AmplifierRear/Subwoofer Output RCA Connectors Ai-NET ConnectorAUX Video Input AUX1 Connector 54-EN RCA Extension Cable Sold Separetely Ai-NET Connector Power Supply ConnectorGround Lead Black

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.