Alpine CVA-1003R owner manual Turning Power On and Off, Raising the Monitor

Page 9

Turning Power On and Off

Some of this unit's functions, cannot be performed while the vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the parking brake, before attempting these operations.

1 Press the PWR (Power) button to turn on the unit.

The opening screen appears automatically on the monitor display.

NOTE

The unit can be turned on by pressing any other buttons except the OPEN/CLOSE and ANGLE 7 8 buttons.

The volume level gradually increases to the previous level you were listening to before the unit was turned off. Press and hold the PWR (Power) button for at least 2 seconds to turn off the unit.

NOTES

•After turning the system off, a slight ghost of the image will remain temporarily. This is an effect peculiar to LCD technology and is normal.

•Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal.

•The CVA-1003R draws minimal current even when its power switch is turned off. If the switched power (ignition) lead of the CVA-1003R is connected directly to the positive (+) post of the vehicle's battery, the battery may be discharged. If this lead is unswitched, it must be disconnected from the battery post should the vehicle be left unused for an extended period of time.

An SPST (Single-Pole, Single-Throw) switch (sold separately) can be added to simplify this procedure. Then, you can simply place it in the OFF position when you leave the vehicle. Turn the SPST switch back ON before using the CVA-1003R. For connecting the SPST switch, refer to "Connection Diagram of SPST Switch" on page 49.

•Some operation of the unit cannot be performed while the vehicle is in motion. In this case, be sure to first stop your vehicle and apply the parking brake, then perform the operation.

Basic Operation

Raising the Monitor

1 Press the OPEN/CLOSE button.

The unit beeps 3 times and raises the monitor automatically.

NOTES

•The CVA-1003R is a precision device. With gentle handling, its unique capabilities can be enjoyed for a long time.

•If the monitor touches an obstacle while it is being raised, the unit will stop raising the monitor immediately. Should this occur, remove the obstacle and press the OPEN/CLOSE button again to raise the monitor.

•When the movable monitor is opened, do not place any object on the monitor and be careful not to bump or apply any pressure to the monitor while it is open. This can cause damage to the mechanism.

•Under low ambient temperature conditions, the display may be dark for a short period of time immediately after the power is turned on. Once the LCD has warmed up, the display will return to normal.

•For your safety, some operation of the unit cannot be performed while the vehicle is in motion. In this case, first stop the vehicle and engage the parking brake, then perform the operation.

7-EN

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Detaching the Front Panel Basic OperationAttaching the Front Panel Initial System Start-UpRaising the Monitor Turning Power On and OffAdjusting the Monitor Viewing Angle Lowering the MonitorSelecting the Monitors Opening Position Turning Loudness On and Off Audio Mute Function→ VOL → BAL → FAD Automatic Seek Tuning Manual TuningExample of Radio mode Screen Radio OperationTuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations PI Seek SettingReceiving RDS Regional Local Stations Press the T.INFO button to activate the normal mode PTY Programme Type TuningReceiving Traffic Information → Light M → Classics → Other MWhen traffic information stations cannot be received Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type Displaying Radio Text CD Player/Changer Operation Optional Example of CD Mode ScreenPlaying Optional CD Player or Changer Music Sensor SkipRepeat Play Fast Forward and Backward→ Repeat → Repeat ALL → off → RPT → RPT ALL → offScanning Programmes X. Random PlayIt is possible to title your favourite CDs Titling DiscsWhen a 12-disc CD Changer is connected Erasing Disc TitleControlling CD Changer Multi-Changer Selection Example of MD Mode Screen MD Player Operation OptionalPlaying Mini-Disc MD Music Sensor Skip 24-EN Still/Pause Playing DVD/Video CD/CDChapter DVD/Track Video CD Sensor Fast Forward/BackwardDVD Repeat Play Controlling DVD ChangerVideo CD/CD Playback startsNavigation System Operation Optional Turning on the Navigation ModeAbout Title and Text Displaying the Title/TextMD mode Other Useful FeaturesPress the g DN or f UP button to adjust the selected mode Setting the Bass ControlOperation with the monitor display closed Example of sub displayEach time you press the Preset 2 button, the blinking shifts Setting the Treble ControlExample of Setup Screen Switching PhaseAdjusting Brightness of Picture Adjusting Colour of PictureIllumination Control Switching the Background Screen Adjusting Tint of PictureSetting Automatic Opening/ Closing of Monitor CD Text/MD Title Scroll SettingTurning Sound Guide Function On or Off Setting the Clock DisplayDisplaying Time Setting TimeSelecting Rear Monitor NAV.Switching NTSC/PAL Setting Setting the External InputDesired setting Switching the Tuner ModeSubwoofer Control On and Off Press the g DN or f UP button to selectSetting the External Expansion Box Interrupt Feature MIX LevelSwitching Disc Mode Switching Display ModesRecalling Stored Settings Radio AUX ∗ NAV Simultaneous OperationRadio AUX2 NAVOperation with the Monitor Display Closed Case of Difficulty InformationMonitor display Sub display HI-TEMPMonitor Section SpecificationsPrecautions Installation and ConnectionsInstallation using the vehicles Factory brackets InstallationLocation RemovalIf the ACC power supply is not available To prevent external noise from entering the audio systemCVA-1003R Antenna ISO Antenna Plug Basic ConnectionsRemote Control Output Lead White/Brown Switched Power Lead Ignition RedPower Antenna Lead Blue Battery Lead YellowAmplifier System Example 1 Refer also to Basic ConnectionsRear/Subwoofer Output RCA Connectors Ai-NET ConnectorAUX Video Input AUX1 Connector 54-EN RCA Extension Cable Sold Separetely Ai-NET Connector Power Supply ConnectorGround Lead Black

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents