Alpine CVA-1003R owner manual Information, Case of Difficulty

Page 46

Information

In Case of Difficulty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

Basic

No function or display.

•Vehicle's ignition is off.

-If connected following instructions, the unit will not operate with the vehicle's ignition off.

•Improper power lead connections.

-Check power lead connections.

•Blown fuse.

-Check the fuse on the battery lead of the unit; replace with the proper value if necessary.

•Internal micro-computer malfunctioned due to interference noise etc.

-Press the Reset switch with a ballpoint pen or other pointed article.

•Weak or no battery power.

-Check battery.

No sound or unnatural sound.

•Incorrect setting of volume/balance/fader controls.

-Readjust the controls.

•Connections are not properly or securely made.

-Check the connections and firmly connect.

Screen not displayed.

•Brightness control is set at the minimum position.

-Adjust the Brightness control.

•Temperature in the vehicle is too low.

-Increase the vehicle's interior temperature to operation temperature range.

•Connections to the DVD/CD player, navigation system are not securely made.

-Check the connections and firmly connect.

Movement of displayed picture is abnormal.

•Temperature in the vehicle is too high.

-Allow the vehicle's interior temperature to cool.

Unclear or noisy display.

•Fluorescent plate is worn out.

-Replace the fluorescent plate.

Navigation system inoperative.

•Connections with the navigation system are improper.

-Check the connections with the navigation system and connect the cables correctly and firmly.

Unclear picture display.

•Fluorescent tube is exhausted. - Replace the fluorescent tube∗.

∗The fluorescent tube replacement is not free of charge even within the warranty period, for the tube is an article of consumption.

Radio

Unable to receive stations.

•No antenna or open connection in cable.

- Make sure the antenna is properly connected;

replace the antenna or cable if necessary.

Unable to tune stations in the seek mode.

•You are in a weak signal area.

-Make sure the tuner is in the DX mode.

•If the area you are in is a primary signal area, the antenna may not be grounded and connected properly.

-Check your antenna connections; make sure the antenna is properly grounded at its mounting location.

•The antenna may not be the proper length.

-Make sure the antenna is fully extended; if broken, replace the antenna with a new one.

Broadcast is noisy.

•The antenna is not the proper length.

-Extend the antenna fully; replace it if it is broken.

•The antenna is poorly grounded.

-Make sure the antenna is grounded properly at its mounting location.

•The station signal is weak and noisy.

-If above solution does not work, tune in another station.

44-EN

Page 45 Page 47
Image 46
Page 45 Page 47
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Attaching the Front Panel Basic OperationDetaching the Front Panel Initial System Start-UpTurning Power On and Off Raising the MonitorLowering the Monitor Adjusting the Monitor Viewing AngleSelecting the Monitors Opening Position Audio Mute Function Turning Loudness On and Off→ VOL → BAL → FAD Example of Radio mode Screen Manual TuningAutomatic Seek Tuning Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationPI Seek Setting Recalling Preset RDS StationsReceiving RDS Regional Local Stations Receiving Traffic Information PTY Programme Type TuningPress the T.INFO button to activate the normal mode → Light M → Classics → Other MReceiving Traffic Information While Playing CD or Radio When traffic information stations cannot be receivedPriority PTY Programme Type Displaying Radio Text Playing Optional CD Player or Changer Example of CD Mode ScreenCD Player/Changer Operation Optional Music Sensor Skip→ Repeat → Repeat ALL → off Fast Forward and BackwardRepeat Play → RPT → RPT ALL → offX. Random Play Scanning ProgrammesTitling Discs It is possible to title your favourite CDsErasing Disc Title When a 12-disc CD Changer is connectedControlling CD Changer Multi-Changer Selection MD Player Operation Optional Example of MD Mode ScreenPlaying Mini-Disc MD Music Sensor Skip 24-EN Chapter DVD/Track Video CD Sensor Playing DVD/Video CD/CDStill/Pause Fast Forward/BackwardVideo CD/CD Repeat Play Controlling DVD ChangerDVD Playback startsTurning on the Navigation Mode Navigation System Operation OptionalDisplaying the Title/Text About Title and TextOther Useful Features MD modeOperation with the monitor display closed Setting the Bass ControlPress the g DN or f UP button to adjust the selected mode Example of sub displaySetting the Treble Control Each time you press the Preset 2 button, the blinking shiftsSwitching Phase Example of Setup ScreenAdjusting Colour of Picture Adjusting Brightness of PictureIllumination Control Adjusting Tint of Picture Switching the Background ScreenCD Text/MD Title Scroll Setting Setting Automatic Opening/ Closing of MonitorSetting the Clock Display Turning Sound Guide Function On or OffSelecting Rear Monitor Setting TimeDisplaying Time NAV.Setting the External Input Switching NTSC/PAL SettingSubwoofer Control On and Off Switching the Tuner ModeDesired setting Press the g DN or f UP button to selectInterrupt Feature MIX Level Setting the External Expansion BoxSwitching Display Modes Switching Disc ModeRecalling Stored Settings Radio Simultaneous OperationRadio AUX ∗ NAV AUX2 NAVOperation with the Monitor Display Closed Information Case of DifficultyHI-TEMP Monitor display Sub displaySpecifications Monitor SectionInstallation and Connections PrecautionsLocation InstallationInstallation using the vehicles Factory brackets RemovalTo prevent external noise from entering the audio system If the ACC power supply is not availableCVA-1003R Basic Connections Antenna ISO Antenna PlugPower Antenna Lead Blue Switched Power Lead Ignition RedRemote Control Output Lead White/Brown Battery Lead YellowSystem Example 1 Refer also to Basic Connections AmplifierAi-NET Connector Rear/Subwoofer Output RCA ConnectorsAUX Video Input AUX1 Connector 54-EN Power Supply Connector RCA Extension Cable Sold Separetely Ai-NET ConnectorGround Lead Black

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents