Alpine CVA-1003R owner manual Setting the External Input, Switching NTSC/PAL Setting

Page 40

Other Useful Features

SETUP

Preset 3

g DN Preset 6

f UP

 

 

 

Preset 5

 

 

Setting the External Input

1 When the monitor display is open, press and hold the SETUP button for at least 2 seconds. The SETUP screen appears.

2 Press the Preset 3 button to select the AUXILIARY setting mode. Press the Preset 3 button to select the desired external input, AUX IN or NAV.IN.

•If the expansion BOX KCE-103 (not supplied) is connected and the unit is set to Expand Box ON (page 40), you can select AUX-1 IN/AUX-2 IN/ NAV.IN.

3 Press the g DN or f UP button to set ON/ OFF.

To set another setting, press the Preset 3 button or another Preset button.

NOTE

When ∗1AUX IN (∗1,∗2AUX1 IN, ∗2AUX2 IN) and NAV.IN are set to ON, the EXTERNAL INPUT is displayed during the source and SIMUL switching.

∗1 When a DVD player or DVD changer is connected, DVD player or DVD changer is displayed in the display.

∗2 When more than two DVD players or DVD changers are connected, DVD player is displayed in AUX1 IN, and DVD changer is displayed in AUX2 IN.

Switching NTSC/PAL Setting

1 When the monitor display is open, press and hold the SETUP button for at least 2 seconds. The SETUP screen appears.

2 Press the Preset 3 button to activate the AUXILIARY setting mode. Press the Preset 3 button again to select AUX SIG.

When connecting the optional expansion box (KCE-103V), you can select AUX1 SIG. or AUX2 SIG.

3 Press the g DN or f UP button to set NTSC/PAL.

To set another setting, press the Preset 3 button or another Preset button.

4 After setting is completed, press the SETUP button to return to normal mode.

NOTES

•When setting PAL, you cannot adjust the TINT.

•In the Navigation mode, the unit automatically switches to NTSC.

4 After setting is completed, press the SETUP button to return to normal mode.

38-EN

Page 39 Page 41
Image 40
Page 39 Page 41
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Basic Operation Detaching the Front PanelAttaching the Front Panel Initial System Start-UpTurning Power On and Off Raising the MonitorLowering the Monitor Adjusting the Monitor Viewing AngleSelecting the Monitors Opening Position Audio Mute Function Turning Loudness On and Off→ VOL → BAL → FAD Manual Tuning Automatic Seek TuningExample of Radio mode Screen Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationPI Seek Setting Recalling Preset RDS StationsReceiving RDS Regional Local Stations PTY Programme Type Tuning Press the T.INFO button to activate the normal modeReceiving Traffic Information → Light M → Classics → Other MReceiving Traffic Information While Playing CD or Radio When traffic information stations cannot be receivedPriority PTY Programme Type Displaying Radio Text Example of CD Mode Screen CD Player/Changer Operation OptionalPlaying Optional CD Player or Changer Music Sensor SkipFast Forward and Backward Repeat Play→ Repeat → Repeat ALL → off → RPT → RPT ALL → offX. Random Play Scanning ProgrammesTitling Discs It is possible to title your favourite CDsErasing Disc Title When a 12-disc CD Changer is connectedControlling CD Changer Multi-Changer Selection MD Player Operation Optional Example of MD Mode ScreenPlaying Mini-Disc MD Music Sensor Skip 24-EN Playing DVD/Video CD/CD Still/PauseChapter DVD/Track Video CD Sensor Fast Forward/BackwardRepeat Play Controlling DVD Changer DVDVideo CD/CD Playback startsTurning on the Navigation Mode Navigation System Operation OptionalDisplaying the Title/Text About Title and TextOther Useful Features MD modeSetting the Bass Control Press the g DN or f UP button to adjust the selected modeOperation with the monitor display closed Example of sub displaySetting the Treble Control Each time you press the Preset 2 button, the blinking shiftsSwitching Phase Example of Setup ScreenAdjusting Colour of Picture Adjusting Brightness of PictureIllumination Control Adjusting Tint of Picture Switching the Background ScreenCD Text/MD Title Scroll Setting Setting Automatic Opening/ Closing of MonitorSetting the Clock Display Turning Sound Guide Function On or OffSetting Time Displaying TimeSelecting Rear Monitor NAV.Setting the External Input Switching NTSC/PAL SettingSwitching the Tuner Mode Desired settingSubwoofer Control On and Off Press the g DN or f UP button to selectInterrupt Feature MIX Level Setting the External Expansion BoxSwitching Display Modes Switching Disc ModeRecalling Stored Settings Simultaneous Operation Radio AUX ∗ NAVRadio AUX2 NAVOperation with the Monitor Display Closed Information Case of DifficultyHI-TEMP Monitor display Sub displaySpecifications Monitor SectionInstallation and Connections PrecautionsInstallation Installation using the vehicles Factory bracketsLocation RemovalTo prevent external noise from entering the audio system If the ACC power supply is not availableCVA-1003R Basic Connections Antenna ISO Antenna PlugSwitched Power Lead Ignition Red Remote Control Output Lead White/BrownPower Antenna Lead Blue Battery Lead YellowSystem Example 1 Refer also to Basic Connections AmplifierAi-NET Connector Rear/Subwoofer Output RCA ConnectorsAUX Video Input AUX1 Connector 54-EN Power Supply Connector RCA Extension Cable Sold Separetely Ai-NET ConnectorGround Lead Black

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents