Alpine CVA-1003R owner manual Installation, Location, Removal

Page 50

Installation and Connections

Installation

NOTE

For the screw marked , use an appropriate screw for the chosen mounting location.

Installing the Monitor

• Location

3

Before final installation, make sure the display will not hamper gear shifting when it is opened and closed in the chosen location.

NOTE

Install at an angle within 30 degrees from horizontal.

1

Bracket Mounting Sleeve (Included)

Dashboard

Hex Bolt

(Included) Mounting Bracket

CVA-1003R (Included)

Rubber Cap (Included)

Screws(M4x5)

(Included)

Lock Pin

Slide the CVA-1003R into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Supplied Front Frame.

Removal

1Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does

not re-lock before unlocking the second pin.

2Pull the unit out, keeping it unlocked as you do so.

Slide mounting sleeve from main unit (see Removal Procedure below). Slide the mounting sleeve into the dashboard. Install the supplied bracket to the monitor.

<JAPANESE CAR>

Installation using the vehicle's Factory brackets.

CVA-1003R

Ground Lead

2

Hex Nut (M5)

Ground Lead

Chassis

Screw

Metal Mounting Strap

Bolt Stud

CVA-1003R

Front Frame (Included)

Screws (M4x5)

Mounting Bracket

When your vehicle has the Bracket, mount the long hex bolt onto the rear panel of the CVA- 1003R and put the Rubber Cap on the hex bolt. If your vehicle does not have the Mounting Support, reinforce the monitor unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw () already attached to the vehicle's chassis.

48-EN

Page 49 Page 51
Image 50
Page 49 Page 51
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Attaching the Front Panel Basic OperationDetaching the Front Panel Initial System Start-UpTurning Power On and Off Raising the MonitorSelecting the Monitors Opening Position Adjusting the Monitor Viewing AngleLowering the Monitor → VOL → BAL → FAD Turning Loudness On and OffAudio Mute Function Example of Radio mode Screen Manual TuningAutomatic Seek Tuning Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationReceiving RDS Regional Local Stations Recalling Preset RDS StationsPI Seek Setting Receiving Traffic Information PTY Programme Type TuningPress the T.INFO button to activate the normal mode → Light M → Classics → Other MPriority PTY Programme Type When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Displaying Radio Text Playing Optional CD Player or Changer Example of CD Mode ScreenCD Player/Changer Operation Optional Music Sensor Skip→ Repeat → Repeat ALL → off Fast Forward and BackwardRepeat Play → RPT → RPT ALL → offX. Random Play Scanning ProgrammesTitling Discs It is possible to title your favourite CDsControlling CD Changer When a 12-disc CD Changer is connectedErasing Disc Title Multi-Changer Selection Playing Mini-Disc MD Music Sensor Skip Example of MD Mode ScreenMD Player Operation Optional 24-EN Chapter DVD/Track Video CD Sensor Playing DVD/Video CD/CDStill/Pause Fast Forward/BackwardVideo CD/CD Repeat Play Controlling DVD ChangerDVD Playback startsTurning on the Navigation Mode Navigation System Operation OptionalDisplaying the Title/Text About Title and TextOther Useful Features MD modeOperation with the monitor display closed Setting the Bass ControlPress the g DN or f UP button to adjust the selected mode Example of sub displaySetting the Treble Control Each time you press the Preset 2 button, the blinking shiftsSwitching Phase Example of Setup ScreenIllumination Control Adjusting Brightness of PictureAdjusting Colour of Picture Adjusting Tint of Picture Switching the Background ScreenCD Text/MD Title Scroll Setting Setting Automatic Opening/ Closing of MonitorSetting the Clock Display Turning Sound Guide Function On or OffSelecting Rear Monitor Setting TimeDisplaying Time NAV.Setting the External Input Switching NTSC/PAL SettingSubwoofer Control On and Off Switching the Tuner ModeDesired setting Press the g DN or f UP button to selectInterrupt Feature MIX Level Setting the External Expansion BoxRecalling Stored Settings Switching Disc ModeSwitching Display Modes Radio Simultaneous OperationRadio AUX ∗ NAV AUX2 NAVOperation with the Monitor Display Closed Information Case of DifficultyHI-TEMP Monitor display Sub displaySpecifications Monitor SectionInstallation and Connections PrecautionsLocation InstallationInstallation using the vehicles Factory brackets RemovalCVA-1003R If the ACC power supply is not availableTo prevent external noise from entering the audio system Basic Connections Antenna ISO Antenna PlugPower Antenna Lead Blue Switched Power Lead Ignition RedRemote Control Output Lead White/Brown Battery Lead YellowSystem Example 1 Refer also to Basic Connections AmplifierAUX Video Input AUX1 Connector Rear/Subwoofer Output RCA ConnectorsAi-NET Connector 54-EN Ground Lead Black RCA Extension Cable Sold Separetely Ai-NET ConnectorPower Supply Connector

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents