Alpine CVA-1003R owner manual Titling Discs, It is possible to title your favourite CDs

Page 22

CD Player/Changer Operation (Optional)

:/J

SOURCE

gDN

fUP

TITLE

Select buttons (1 through 6)

Titling Discs

It is possible to title your favourite CD's.

NOTE

The Parking Brake must be engaged to access the Title display mode screen. Attempting to access this screen while driving will display the warning-CAN'T OPERATE WHILE DRIVING.

1 When the monitor display is open, press the TITLE button and select the title display mode. For details, see "Displaying the Title/Text" (page 28).

2 Press and hold the TITLE button for at least 3 seconds. The first character will blink.

3 Press the g DN or f UP button to select the desired letter/numeral/symbol available for naming.

4 Press the :/J button to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.

5 Repeat the steps 3 and 4 above to complete the titling. Pressing the :/J button after entering the 8th character, automatically stores the title into memory.

When entering a title of less than 8 characters (for example, 3 character title):

After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 6 to complete the title.

6 Press and hold the TITLE button for at least 3 seconds to record the title.

NOTES

•The memory can store up to 150 titles for CD changer. If you try to store beyond the limit, the display will show "FULL DATA." At this point, no more titles can be stored.

•The CD Changer title length or memory capacity varies depending upon the model being used.

•When you want to erase a title, enter the " " symbol into all spaces.

•The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be cancelled if no action is taken for over 10 seconds.

•Removing power from the unit may delete these titles. Use caution when manipulating the power cord.

20-EN

Page 21 Page 23
Image 22
Page 21 Page 23
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Attaching the Front Panel Basic OperationDetaching the Front Panel Initial System Start-UpTurning Power On and Off Raising the MonitorLowering the Monitor Adjusting the Monitor Viewing AngleSelecting the Monitors Opening Position Audio Mute Function Turning Loudness On and Off→ VOL → BAL → FAD Example of Radio mode Screen Manual TuningAutomatic Seek Tuning Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationPI Seek Setting Recalling Preset RDS StationsReceiving RDS Regional Local Stations Receiving Traffic Information PTY Programme Type TuningPress the T.INFO button to activate the normal mode → Light M → Classics → Other MReceiving Traffic Information While Playing CD or Radio When traffic information stations cannot be receivedPriority PTY Programme Type Displaying Radio Text Playing Optional CD Player or Changer Example of CD Mode ScreenCD Player/Changer Operation Optional Music Sensor Skip→ Repeat → Repeat ALL → off Fast Forward and BackwardRepeat Play → RPT → RPT ALL → offX. Random Play Scanning ProgrammesTitling Discs It is possible to title your favourite CDsErasing Disc Title When a 12-disc CD Changer is connectedControlling CD Changer Multi-Changer Selection MD Player Operation Optional Example of MD Mode ScreenPlaying Mini-Disc MD Music Sensor Skip 24-EN Chapter DVD/Track Video CD Sensor Playing DVD/Video CD/CDStill/Pause Fast Forward/BackwardVideo CD/CD Repeat Play Controlling DVD ChangerDVD Playback startsTurning on the Navigation Mode Navigation System Operation OptionalDisplaying the Title/Text About Title and TextOther Useful Features MD modeOperation with the monitor display closed Setting the Bass ControlPress the g DN or f UP button to adjust the selected mode Example of sub displaySetting the Treble Control Each time you press the Preset 2 button, the blinking shiftsSwitching Phase Example of Setup ScreenAdjusting Colour of Picture Adjusting Brightness of PictureIllumination Control Adjusting Tint of Picture Switching the Background ScreenCD Text/MD Title Scroll Setting Setting Automatic Opening/ Closing of MonitorSetting the Clock Display Turning Sound Guide Function On or OffSelecting Rear Monitor Setting TimeDisplaying Time NAV.Setting the External Input Switching NTSC/PAL SettingSubwoofer Control On and Off Switching the Tuner ModeDesired setting Press the g DN or f UP button to selectInterrupt Feature MIX Level Setting the External Expansion BoxSwitching Display Modes Switching Disc ModeRecalling Stored Settings Radio Simultaneous OperationRadio AUX ∗ NAV AUX2 NAVOperation with the Monitor Display Closed Information Case of DifficultyHI-TEMP Monitor display Sub displaySpecifications Monitor SectionInstallation and Connections PrecautionsLocation InstallationInstallation using the vehicles Factory brackets RemovalTo prevent external noise from entering the audio system If the ACC power supply is not availableCVA-1003R Basic Connections Antenna ISO Antenna PlugPower Antenna Lead Blue Switched Power Lead Ignition RedRemote Control Output Lead White/Brown Battery Lead YellowSystem Example 1 Refer also to Basic Connections AmplifierAi-NET Connector Rear/Subwoofer Output RCA ConnectorsAUX Video Input AUX1 Connector 54-EN Power Supply Connector RCA Extension Cable Sold Separetely Ai-NET ConnectorGround Lead Black

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents