Alpine CVA-1003R Basic Operation, Detaching the Front Panel, Attaching the Front Panel

Page 8

Basic Operation

OPEN/CLOSE

PWR

Detaching the Front Panel

1 Press and hold the PWR (Power) button for more than 2 seconds to turn off the power.

2 Press the (Release) button at lower left side until the front panel pops out.

3 Grasp the left side of the front panel and pull it out.

NOTES

•The front panel may become hot in normal usage (especially the connector terminals), this is not a malfunction.

•To protect the front panel, place it in the supplied carrying case.

Attaching the Front Panel

1 First, insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit.

2 Push the left side of the front panel until it locks firmly into the main unit.

2

1

•Compatibility with Factory Steering Wheel Radio Controls

If your vehicle has steering wheel controls for the radio, an optional steering wheel control interface may be available to connect your Alpine radio. For details, contact your Alpine dealer.

•Controllable with Remote Control

This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer.

Point the optional remote control transmitter at the remote control sensor.

Remote control

Remote control

sensor

sensor

When the monitor

When the monitor

display is open.

display is closed.

•You can use the remote control even when the monitor display is closed.

Initial System Start-Up

Immediately after installing or applying power to the unit, it should be initialized. To do this, first, remove the detachable front panel. Behind the front panel, to the right of the connector, there is a small hole. Using a pencil or other pointed object, press the Reset switch mounted behind this hole to complete the initialization procedure.

NOTE

 

Before attaching the front panel, make sure that there is

 

no dirt or dust on the connector terminals and no foreign

 

object between the front panel and the main unit.

RESET switch

6-EN

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Basic Operation Detaching the Front PanelAttaching the Front Panel Initial System Start-UpTurning Power On and Off Raising the MonitorSelecting the Monitors Opening Position Adjusting the Monitor Viewing AngleLowering the Monitor → VOL → BAL → FAD Turning Loudness On and OffAudio Mute Function Manual Tuning Automatic Seek TuningExample of Radio mode Screen Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationReceiving RDS Regional Local Stations Recalling Preset RDS StationsPI Seek Setting PTY Programme Type Tuning Press the T.INFO button to activate the normal modeReceiving Traffic Information → Light M → Classics → Other MPriority PTY Programme Type When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Displaying Radio Text Example of CD Mode Screen CD Player/Changer Operation OptionalPlaying Optional CD Player or Changer Music Sensor SkipFast Forward and Backward Repeat Play→ Repeat → Repeat ALL → off → RPT → RPT ALL → offX. Random Play Scanning ProgrammesTitling Discs It is possible to title your favourite CDsControlling CD Changer When a 12-disc CD Changer is connectedErasing Disc Title Multi-Changer Selection Playing Mini-Disc MD Music Sensor Skip Example of MD Mode ScreenMD Player Operation Optional 24-EN Playing DVD/Video CD/CD Still/PauseChapter DVD/Track Video CD Sensor Fast Forward/BackwardRepeat Play Controlling DVD Changer DVDVideo CD/CD Playback startsTurning on the Navigation Mode Navigation System Operation OptionalDisplaying the Title/Text About Title and TextOther Useful Features MD modeSetting the Bass Control Press the g DN or f UP button to adjust the selected modeOperation with the monitor display closed Example of sub displaySetting the Treble Control Each time you press the Preset 2 button, the blinking shiftsSwitching Phase Example of Setup ScreenIllumination Control Adjusting Brightness of PictureAdjusting Colour of Picture Adjusting Tint of Picture Switching the Background ScreenCD Text/MD Title Scroll Setting Setting Automatic Opening/ Closing of MonitorSetting the Clock Display Turning Sound Guide Function On or OffSetting Time Displaying TimeSelecting Rear Monitor NAV.Setting the External Input Switching NTSC/PAL SettingSwitching the Tuner Mode Desired settingSubwoofer Control On and Off Press the g DN or f UP button to selectInterrupt Feature MIX Level Setting the External Expansion BoxRecalling Stored Settings Switching Disc ModeSwitching Display Modes Simultaneous Operation Radio AUX ∗ NAVRadio AUX2 NAVOperation with the Monitor Display Closed Information Case of DifficultyHI-TEMP Monitor display Sub displaySpecifications Monitor SectionInstallation and Connections PrecautionsInstallation Installation using the vehicles Factory bracketsLocation RemovalCVA-1003R If the ACC power supply is not availableTo prevent external noise from entering the audio system Basic Connections Antenna ISO Antenna PlugSwitched Power Lead Ignition Red Remote Control Output Lead White/BrownPower Antenna Lead Blue Battery Lead YellowSystem Example 1 Refer also to Basic Connections AmplifierAUX Video Input AUX1 Connector Rear/Subwoofer Output RCA ConnectorsAi-NET Connector 54-EN Ground Lead Black RCA Extension Cable Sold Separetely Ai-NET ConnectorPower Supply Connector

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents