Alpine CVA-1003R owner manual To prevent external noise from entering the audio system

Page 51

Installation and Connections

To prevent external noise from entering the audio system.

•Locate the unit and route the leads at least 10 cm away from the car harness.

•Keep the battery power leads as far away from other leads as possible.

•Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.

•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise suppressors, contact them for further information.

•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.

Parking Brake Lead Connection

If necessary, use a pinch connector to connect the parking brake lead, etc.

12

Vehicle Cable

Pinch Connector

Pliers

Monitor Cable

Stopper

Connection Diagram of SPST Switch (Sold Separately)

(If the ACC power supply is not available)

IGNITION

(Red)

BATTERY

(Yellow)

CVA-1003R

SPST SW (Optional)

Battery

NOTE

If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately). If the switched power (ignition) lead of the CVA-1003R is connected directly to the positive (+) post of the vehicle's battery, the CVA-1003R draws some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged.

49-EN

Page 50 Page 52
Image 51
Page 50 Page 52
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Initial System Start-Up Basic OperationDetaching the Front Panel Attaching the Front PanelRaising the Monitor Turning Power On and OffAdjusting the Monitor Viewing Angle Lowering the MonitorSelecting the Monitors Opening Position Turning Loudness On and Off Audio Mute Function→ VOL → BAL → FAD Radio Operation Manual TuningAutomatic Seek Tuning Example of Radio mode ScreenTuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations PI Seek SettingReceiving RDS Regional Local Stations → Light M → Classics → Other M PTY Programme Type TuningPress the T.INFO button to activate the normal mode Receiving Traffic InformationWhen traffic information stations cannot be received Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type Displaying Radio Text Music Sensor Skip Example of CD Mode ScreenCD Player/Changer Operation Optional Playing Optional CD Player or Changer→ RPT → RPT ALL → off Fast Forward and BackwardRepeat Play → Repeat → Repeat ALL → offScanning Programmes X. Random PlayIt is possible to title your favourite CDs Titling DiscsWhen a 12-disc CD Changer is connected Erasing Disc TitleControlling CD Changer Multi-Changer Selection Example of MD Mode Screen MD Player Operation OptionalPlaying Mini-Disc MD Music Sensor Skip 24-EN Fast Forward/Backward Playing DVD/Video CD/CDStill/Pause Chapter DVD/Track Video CD SensorPlayback starts Repeat Play Controlling DVD ChangerDVD Video CD/CDNavigation System Operation Optional Turning on the Navigation ModeAbout Title and Text Displaying the Title/TextMD mode Other Useful FeaturesExample of sub display Setting the Bass ControlPress the g DN or f UP button to adjust the selected mode Operation with the monitor display closedEach time you press the Preset 2 button, the blinking shifts Setting the Treble ControlExample of Setup Screen Switching PhaseAdjusting Brightness of Picture Adjusting Colour of PictureIllumination Control Switching the Background Screen Adjusting Tint of PictureSetting Automatic Opening/ Closing of Monitor CD Text/MD Title Scroll SettingTurning Sound Guide Function On or Off Setting the Clock DisplayNAV. Setting TimeDisplaying Time Selecting Rear MonitorSwitching NTSC/PAL Setting Setting the External InputPress the g DN or f UP button to select Switching the Tuner ModeDesired setting Subwoofer Control On and OffSetting the External Expansion Box Interrupt Feature MIX LevelSwitching Disc Mode Switching Display ModesRecalling Stored Settings AUX2 NAV Simultaneous OperationRadio AUX ∗ NAV RadioOperation with the Monitor Display Closed Case of Difficulty InformationMonitor display Sub display HI-TEMPMonitor Section SpecificationsPrecautions Installation and ConnectionsRemoval InstallationInstallation using the vehicles Factory brackets LocationIf the ACC power supply is not available To prevent external noise from entering the audio systemCVA-1003R Antenna ISO Antenna Plug Basic ConnectionsBattery Lead Yellow Switched Power Lead Ignition RedRemote Control Output Lead White/Brown Power Antenna Lead BlueAmplifier System Example 1 Refer also to Basic ConnectionsRear/Subwoofer Output RCA Connectors Ai-NET ConnectorAUX Video Input AUX1 Connector 54-EN RCA Extension Cable Sold Separetely Ai-NET Connector Power Supply ConnectorGround Lead Black

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents