Alpine CVA-1003R owner manual Setting the Bass Control, Operation with the monitor display closed

Page 32
When the monitor display is open, press the bass engine button. Bass engine mode is displayed in the monitor display.
Press the Preset 1 button to select the desired mode.

Other Useful Features

 

Preset 1

bass engine

Preset 2

g DN

 

f UP

 

 

Preset 1

bass engine

Preset 2

 

g DN

 

fUP

Setting the Bass Control

You can change the Bass Frequency emphasis to create your own tonal preference.

1

NOTES

•If no buttons are pressed within 10 seconds, the Bass control setting will be turned off automatically.

•Depending on the type of external audio processors connected to the unit, you may not be able to set some settings.

•The settings of the Bass will be individually memorized for each source (FM, MW, LW and CD) until the setting is changed. Depending on the connected devices, some functions and display indications do not work.

2

3 Press the g DN or f UP button to adjust the selected mode.

•Bass Level : -7~+7

You can emphasize or weaken the bass frequency.

•Bass centre frequency :

60Hz ↔ 70Hz ↔ 80Hz ↔ 90Hz ↔ 100Hz ↔ 130Hz ↔ 150Hz ↔ 200Hz Emphasizes the displayed Bass frequency ranges.

•Bass Band Width (Q-Factor):

WIDE1 ↔ WIDE2 ↔ WIDE3 ↔ WIDE4 (Narrow)←..............................→ (Wide)

Changes the displayed frequency's band width to wide or narrow.

4 Press the bass engine button to return to the normal mode.

Operation with the monitor display closed

You can set the Bass control with the monitor display closed.

1 Press the bass engine button.

2 Press the Preset 1 button. BASS is displayed for 2 seconds in the sub display, then the value of BASS Level blinks.

3 Each time you press the Preset 1 button, the blinking shifts.

Example of sub display

4 Press the g DN or f UP button to adjust the selected mode.

30-EN

Page 31 Page 33
Image 32
Page 31 Page 33
Contents CVA-1003R Alpine CD Changers Give You More Contents Installation Connections Precautions Page Introduction Basic Operation Detaching the Front PanelAttaching the Front Panel Initial System Start-UpTurning Power On and Off Raising the MonitorSelecting the Monitors Opening Position Adjusting the Monitor Viewing AngleLowering the Monitor → VOL → BAL → FAD Turning Loudness On and OffAudio Mute Function Manual Tuning Automatic Seek TuningExample of Radio mode Screen Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationReceiving RDS Regional Local Stations Recalling Preset RDS StationsPI Seek Setting PTY Programme Type Tuning Press the T.INFO button to activate the normal modeReceiving Traffic Information → Light M → Classics → Other MPriority PTY Programme Type When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Displaying Radio Text Example of CD Mode Screen CD Player/Changer Operation OptionalPlaying Optional CD Player or Changer Music Sensor SkipFast Forward and Backward Repeat Play→ Repeat → Repeat ALL → off → RPT → RPT ALL → offX. Random Play Scanning ProgrammesTitling Discs It is possible to title your favourite CDsControlling CD Changer When a 12-disc CD Changer is connectedErasing Disc Title Multi-Changer Selection Playing Mini-Disc MD Music Sensor Skip Example of MD Mode ScreenMD Player Operation Optional 24-EN Playing DVD/Video CD/CD Still/PauseChapter DVD/Track Video CD Sensor Fast Forward/BackwardRepeat Play Controlling DVD Changer DVDVideo CD/CD Playback startsTurning on the Navigation Mode Navigation System Operation OptionalDisplaying the Title/Text About Title and TextOther Useful Features MD modeSetting the Bass Control Press the g DN or f UP button to adjust the selected modeOperation with the monitor display closed Example of sub displaySetting the Treble Control Each time you press the Preset 2 button, the blinking shiftsSwitching Phase Example of Setup ScreenIllumination Control Adjusting Brightness of PictureAdjusting Colour of Picture Adjusting Tint of Picture Switching the Background ScreenCD Text/MD Title Scroll Setting Setting Automatic Opening/ Closing of MonitorSetting the Clock Display Turning Sound Guide Function On or OffSetting Time Displaying TimeSelecting Rear Monitor NAV.Setting the External Input Switching NTSC/PAL SettingSwitching the Tuner Mode Desired settingSubwoofer Control On and Off Press the g DN or f UP button to selectInterrupt Feature MIX Level Setting the External Expansion BoxRecalling Stored Settings Switching Disc ModeSwitching Display Modes Simultaneous Operation Radio AUX ∗ NAVRadio AUX2 NAVOperation with the Monitor Display Closed Information Case of DifficultyHI-TEMP Monitor display Sub displaySpecifications Monitor SectionInstallation and Connections PrecautionsInstallation Installation using the vehicles Factory bracketsLocation RemovalCVA-1003R If the ACC power supply is not availableTo prevent external noise from entering the audio system Basic Connections Antenna ISO Antenna PlugSwitched Power Lead Ignition Red Remote Control Output Lead White/BrownPower Antenna Lead Blue Battery Lead YellowSystem Example 1 Refer also to Basic Connections AmplifierAUX Video Input AUX1 Connector Rear/Subwoofer Output RCA ConnectorsAi-NET Connector 54-EN Ground Lead Black RCA Extension Cable Sold Separetely Ai-NET ConnectorPower Supply Connector

CVA-1003R specifications

The Alpine CVA-1003R is an advanced multimedia receiver designed to enhance the in-car entertainment experience. This unit combines high-quality sound output with versatile connectivity options, making it one of the popular choices for car audio enthusiasts.

One of the main features of the CVA-1003R is its 7-inch motorized touchscreen display. This screen not only delivers clear and vibrant visuals but also ensures an intuitive user interface. The touchscreen functionality allows users to navigate through the various features effortlessly. Additionally, the motorized aspect adds a touch of sophistication, as the display can retract into the unit when not in use.

The Alpine CVA-1003R is packed with advanced audio technologies. It utilizes a built-in amplifier that delivers robust power, enhancing the clarity and quality of the sound output. The unit also comes with a 3-band parametric equalizer, enabling users to customize their audio settings according to personal preferences. The inclusion of a high-pass and low-pass filter allows for optimal tuning of different speakers, ensuring a balanced soundstage.

Connectivity is a standout characteristic of this receiver. It comes equipped with multiple audio and video inputs, including RCA inputs for external devices like gaming consoles and cameras. The unit also provides USB and auxiliary inputs, making it compatible with a wide range of smartphones and portable media players. Bluetooth technology further enhances connectivity, allowing for hands-free calling and wireless music streaming, freeing users from tangled cables.

The CVA-1003R supports various media formats, including MP3, AAC, and WMA, providing versatility in playback options. Users can enjoy their favorite music from CDs, USB drives, or via Bluetooth streaming from their smartphones. The integration of Pandora and Spotify ensures that users have access to a vast array of music streaming options directly from the receiver.

In terms of build quality, the Alpine CVA-1003R features a durable construction designed to withstand the rigors of automotive environments. Its sleek design complements modern vehicle interiors while providing ease of use.

In summary, the Alpine CVA-1003R stands out for its impressive display, advanced sound technologies, extensive connectivity options, and compatibility with various media formats. This receiver is an excellent choice for anyone looking to elevate their in-car listening experience and stay connected while on the go.
Top Page Image Contents