DRemote control
3( POWER/DIM: Switch device on and off/dim display illumination
4)
4! /: Title/Station search backwards/forwards 4@ 
4#
4$ INT/3: Intro function in the CD/MP3 operation mode, number button 3
4% PTY/7: ("Programme Type") Station search by
PTY group/number button 7 4^ Number button 6
4& DSP/*: ("Digital Sound Processing") Sound settings/ button *
4* BAND/0: Select band range/number button 0 4( Battery compartment
5)SEL/#: Access settings for volume, bass, treble, balance and fader/ button #
5! TA/9: ("Traffic Announcement"): Activate traffic radio station/ number button 9
5@ AF/8: ("Alternative Frequency"): Alternative frequency search/ number button 8
5# Number button 5
5$ RDM/4: Random playback in the CD/MP3 operation mode/ number button 4
5% RPT/2: Repeat function in the CD/MP3 operation mode/ number button 2
5^ / 1: Playback start or stop/ number button 1
5& MODE: Set operation mode/loudness function
EMicrophone unit
5* green LED for connection status 5( TALK button
6)Microphone
6! Microphone unit plug
FCase for face plate
GKey for installation bracket
HInstallation bracket
IBezel frame
Installation
If you want to install your car radio yourself follow the installation and connection instructions in this manual.
Installation instructions
•Insert the device in the slot provided for it or select a location for mounting the device that does not obstruct the driver during normal operation of the vehicle.
•Briefly connect the cable before finally installing the device. Make sure that it is plugged in properly and that the system functions correctly.
•In the event that changes to the vehicle are ne- cessary contact your vehicle dealer/qualified radio installation facility.
•Install the device in such a way as to avoid in- juries in the event of harsh braking.
•If the device is installed with more than a 30° in- clination it could lead to function disorders.
•Avoid installation of the device in the vicinity of high temperature sources (i.e. direct sunlight or heating vents) or dusty and dirty locations. Do not subject the device to excessive vibration.
Connection
Note:
Make sure that a permanent positive connection is applied to the station memory of connection 6 in the ISO block A.
You can connect an external amplifier to the audio cinch output. For this follow the operating instructions for the external amplifier.
- 6 -