Settings for the multi controller
Via the multi controller you can, in addition, admi- nister settings for the switch on volume, time of day settings, traffic radio volume, EON function, recor- ding format and the equalizer.
•Hold down the multi controller for approx. 2 se- conds and then press it several times to access the following settings:
INVOL - switch on volume
•Turn the multi controller in order to set a volume level, which will apply when the car radio is switched on.
ADJ - Time of day
Your car radio is equipped with an RDS controlled clock. The clock sets itself automatically when the EON function is switched on and also continues to run when the radio is switched off. If you do not receive any RDS signal you can also set the time of day manually.
•Turn the multi controller to the right to set the hours and to the left to set the minutes.
TAVOL - Volume for traffic radio
•Turn the multi controller in order to set a volume level, which will apply when the traffic report is switched on.
EON - Function
Turn the multi controller in order to switch the EON function on (EON ON) or off (EON OFF). When the EON function is switched on the radio switches to traffic radio or PTY types if the TA or PTY function has been switched on.
REC - Recording format
•Turn the multi controller to set the record format for recording on SD/MMC and/or USB data carriers, MP3 (MP3 data) or WMA (Windows Media Audio).
DSP - Equalizer
•Turn the multi controller to select one of the set- tings DSP CLASSIC, DSP ROCK, DSP POP, DSP FLAT or DSP NONE. In the setting DSP NONE
no Digital Sound Processing (DSP) is switched on. You can also set the equalizer by pressing the DSP button on the remote control. With this setting DSP is switched off when the radio frequency is shown again.
The DSP equalizer setting is shown at the bottom of the display.
Radio functions
Selecting the band range
•Press the BND/ENT button to switch between USW (FM1, FM2, FM3) and medium wave (MW1, MW2).
Automatic station search
• Press briefly the search buttons or to start a search forwards/backwards. The search stops at the next station found.
Manual station selection
• | When you hold down one of the buttons or |
| for two seconds you switch to manual station |
| search. MANUAL appears in the display. |
• | Now press the search buttons or several |
| times to set the frequency in steps of 0.05 MHz |
| (MW: 9 kHz) up/down. |
If no button is pressed for approx. two seconds the automatic station search is set again. AUTO appears in the display..
- 11 -