•You can store up to eight voice tags in the phone’s memory.
NOTE: The phone must be in a service area with adequate cellular signal strength. Also, you must say the name exactly as you said it when you recorded it. This may be difficult in, for example, a noisy environment or during an emer- gency, so you should not rely solely upon voice dialling in all circumstances.
Adding a voice tag to a phone book entry
•Save or copy the names and phone numbers, to which you want to add a voice tag, in your phone’s memory.
•Voice tags can also be added to names and phones numbers on your SIM card, but the voice tags may be erased if you remove your SIM card to another phone or use another SIM card in your phone.
1.In the standby mode, press Names to access the phone book and se- lect Search.
2.Scroll to the name and phone number to which you want to add a voice tag and press (Detail and) Op- tions.
3.Scroll to Add voice tag and press Se- lect. Press Start, then speak after tone is displayed.
4.Press Start. The phone sounds a notification tone and Please speak now is displayed.
5.Say clearly the word(s) you want record as a voice tag.
6.The phone plays the recorded tag, and Playing voice tag is displayed. If you do not want to save the re- cording, press Quit.
7.When the voice tag has been suc- cessfully saved, Voice tag saved is displayed.
The voice tag is saved in the phone book’s Voice tags list.
Replaying a voice tag
1.In the standby mode, press Names.
2.Scroll to Voice tag and press Select.
3.Scroll to the name (or phone number) you wish to replay and press Options.
4.Scroll to Playback and press OK.
Making a call
1.In the standby mode, press and hold Names to activate the voice dialling. The phone sounds a noti- fication tone and Please speak now is displayed.
2.Say the voice tag clearly.
If no match for the voice tag is found or recognised, the phone may ask you to try again. Press Yes