Sharp SD-AT1000W operation manual Basic, Listening to sounds with multi-channel Ch, etc, Enjoying

Page 24

SD-AT1000WEnjoying various sounds (continued)

ENGLISH

Operation	various sounds -
Basic	- Enjoying

E-23

"Listening to sounds with multi-channel

(5.1 ch, etc.)

When connecting the DVD player to the DIGITAL IN 1/2 sockets, you can enjoy Dolby Digital or DTS sounds with spacious effects.

You can also enjoy spacious effects when listening to 2-channel stereo sounds using Dolby Pro Logic .

Whilst the disc is playing, press the MULTI CHANNEL button.

A maximum of 5.1ch surround sound is re- produced to provide three-dimensional ef- fect.

Dolby Pro Logic expands 2-channel stereo sound of CDs, etc. to 5.1 ch.

Surround types can be changed in this mode.

Press the SOUND MODE button.

Each press of the button changes the mode.

The bass level is increased for powerful sound effect.

You can enjoy the original sound as it is.

You can enjoy lively sound by pro- ducing the clear sound.

Soft but powerful sound is achieved even at low volumes.

This mode provides an expansive listening area by emitting 2-chan- nel sound.

You cannot select "SURROUND" if the audio source contains DTS or Dolby Digital signals.

04/7/9

SD-AT1000W_LAG_E4.fm

TINSZA121AWZZ

Image 24

Contents SD-AT1000W IntroductionContents Special notesAccessories PrecautionsSD-AT1000WVolume control GeneralControls and indicators IndicatorsInformation Main unit front panelMain unit rear panel Remote control GeneralControls Sets the VCR power to on or Stops the cassette Switches the input to TV or VCRSelects the DVD menu Displays the DVD menuFront speaker Centre speakerSubwoofer Bass Reflex Duct Woofer Speaker TerminalsUsing antislip speaker cushions Speaker functionsCarrying the subwoofer Speaker connection Connecting speaker wires Installing the AM loop aerialSupplied FM aerial Supplied AM loop aerialAudio connections to DVD players, VCRs, TVs, etc ConnectionsPlayers, VCRs, TVs, etc System connections to DVDUsing other subwoofer SystemAudio connection to TVs or other equip Ment DVD players, VCRs, TVs, etcConnecting the AC power lead AC power leadConnecting To set the unit to stand-by modeSetting the AM/FM interval To change the AM/FM tuning intervalFor Use PreparationSystem installation Preparation for Use System installationPlacing the speaker system Magnetically shielded speakersRemote control Battery installation Test of the remote controlUse Headphones SD-AT1000WGeneral controlMuting UseSetting the clock Manual or Auto tuning SD-AT1000WListening to the radioBasic Operation Listening to the radio To erase all the contents of the preset Memory Memorising a station To recall a memorised station Listening to the playback sound from DVD players, VCRs, etc Audio signal indicators / Speaker indicators Enjoying various soundsOperation Various soundsPress the Sound Mode button BasicListening to sounds with multi-channel Ch, etc EnjoyingPress the Sound Mode button to turn the Bass on or Bass OFF Listening to 2-channel stereo soundsWhilst the disc is playing, press the Stereo button Adjusting speaker delay/speaker level Advanced FeaturesSpeaker delay setting Adjusting speaker delay/speaker levelSpeaker level setting To end the speaker settingFL CT FR SW SL SR Readjust the speaker levels if not equal Speaker type Level range Default settingTimer and sleep operation Setting the timerTurn the power on and press the Timer but- ton Before setting timerAdvanced Features Timer and sleep operation Setting the sleep timer To use timer and sleep operation togetherTroubleshooting chart Troubleshooting chartSymptom Possible cause Reference ReferencesMaintenance Error indicators and warningsOptional accessory Cleaning the cabinetSpecifications SpecificationsSD-AT1000WLAGmemo1 TINSZA121AWZZ SD-AT1000WLAGmemo2 TINSZA121AWZZ Sharp Corporation