Sharp SD-AT1000W Setting the sleep timer, To use timer and sleep operation together

Page 30

SD-AT1000W

ENGLISH

Timer and sleep operation (continued)

	" Setting the sleep timer	To confirm the remaining sleep time:
	You can set the unit to the power stand-by mode at the specified time.	1	Whilst "SLEEP" is indicated, press the TIMER button.
		2	Within 10 seconds, press the or button to select "SLEEP".

Advanced Features - Timer and sleep operation -

1 During playback, press the TIMER button.

2 Within 10 seconds, press the or button to select "SLEEP SET", and press the ENTER button.

3 Press the or button to select the time.

(Maximum: 2 hours - Minimum: 1 minute)

! 2 hours - 5 minutes 5-minute intervals

!5 minutes - 1 minute 1-minute intervals

4 Press the ENTER button.

"SLEEP" will appear.

5 The unit will enter the power stand-by mode automatically after the preset time has elapsed.

The volume will be turned down 1 minute before the sleep operation finishes, and then you cannot change the volume.

Caution:

This unit cannot set the sleep timer of other equipment.

To use the sleep timer using other equipment, you should also set the timer on the equipment separately.

Remaining sleep time

!The remaining sleep time is displayed for about 10 seconds.

!You can change the remaining sleep time whilst it is displayed by pressing the ENTER button (steps 3 - 4).

To cancel the sleep operation:

Press the ON/STAND-BY button whilst "SLEEP" is indicated.

To cancel the sleep operation without setting the system to the stand-by mode, pro- ceed as follows.

1Press the TIMER button.

2Within 10 seconds, press theorbutton to select "SLEEP OFF", and press the ENTER button.

"To use timer and sleep operation together

You can fall asleep and wake up to the radio.

1 Set the sleep timer (steps 1 - 4).

Sleep operation starts.

2 Set the timer playback.

("Setting the timer" on page 27, steps 1 - 7)

1 Sleep timer setting
			2 Timer playback setting			Start time			Finish time
			2 Timer playback setting			Start time			Finish time

	1minuteminute- 2hours- hours							Desired time
						Timer		playback
Sleep operation				Sleep operation will		Timer		playback	Timer playback will
starts.				automatically stop.		starts.			automatically stop.

E-29

04/7/21

SD-AT1000W_LAG_E5.fm

TINSZA121AWZZ

Image 30

Contents SD-AT1000W IntroductionContents Special notesVolume control AccessoriesPrecautionsSD-AT1000W GeneralInformation Controls and indicatorsIndicators Main unit front panelMain unit rear panel Remote control GeneralControls Selects the DVD menu Sets the VCR power to on or Stops the cassetteSwitches the input to TV or VCR Displays the DVD menuSubwoofer Front speakerCentre speaker Bass Reflex Duct Woofer Speaker TerminalsUsing antislip speaker cushions Speaker functionsCarrying the subwoofer Speaker connection Supplied FM aerial Connecting speaker wiresInstalling the AM loop aerial Supplied AM loop aerialPlayers, VCRs, TVs, etc Audio connections to DVD players, VCRs, TVs, etcConnections System connections to DVDAudio connection to TVs or other equip Ment Using other subwooferSystem DVD players, VCRs, TVs, etcConnecting Connecting the AC power leadAC power lead To set the unit to stand-by modeFor Use Setting the AM/FM intervalTo change the AM/FM tuning interval PreparationPlacing the speaker system System installationPreparation for Use System installation Magnetically shielded speakersRemote control Battery installation Test of the remote controlUse Muting HeadphonesSD-AT1000WGeneral control UseSetting the clock Manual or Auto tuning SD-AT1000WListening to the radioBasic Operation Listening to the radio To erase all the contents of the preset Memory Memorising a stationTo recall a memorised station Listening to the playback sound from DVD players, VCRs, etc Operation Audio signal indicators / Speaker indicatorsEnjoying various sounds Various soundsListening to sounds with multi-channel Ch, etc Press the Sound Mode buttonBasic EnjoyingPress the Sound Mode button to turn the Bass on or Bass OFF Listening to 2-channel stereo soundsWhilst the disc is playing, press the Stereo button Speaker delay setting Adjusting speaker delay/speaker levelAdvanced Features Adjusting speaker delay/speaker levelFL CT FR SW SL SR Readjust the speaker levels if not equal Speaker level settingTo end the speaker setting Speaker type Level range Default settingTurn the power on and press the Timer but- ton Timer and sleep operationSetting the timer Before setting timerAdvanced Features Timer and sleep operation Setting the sleep timer To use timer and sleep operation togetherSymptom Possible cause Reference Troubleshooting chartTroubleshooting chart ReferencesOptional accessory MaintenanceError indicators and warnings Cleaning the cabinetSpecifications SpecificationsSD-AT1000WLAGmemo1 TINSZA121AWZZ SD-AT1000WLAGmemo2 TINSZA121AWZZ Sharp Corporation