Sharp SD-AT1000W operation manual Speaker level setting, Test tone, To end the speaker setting

SD-AT1000W(LAG) TINSZA121AWZZ

5

Step 2. Speaker level setting

If sounds from the speakers are uneven, you can equalise them by adjusting the speaker levels.

1 Press the AMP SET UP button, and the or button to select "SP LEVEL". Then press the ENTER button.

2 Within 10 seconds, press the or button to select the desired speaker.

3 Within 10 seconds, press the or button to adjust the level.

!You can adjust the level at 1 dB intervals.

!To adjust the levels of other speakers, repeat the operation from step 2.

	Speaker type	Level range	Default setting
FL	Front speaker (Left)	- 6 dB to + 6 dB	0 dB
CT	Centre speaker	- 6 dB to + 6 dB	0 dB
FR	Front speaker (Right)	- 6 dB to + 6 dB	0 dB
SR	Surround speaker (Right)	- 6 dB to + 6 dB	0 dB
SL	Surround speaker (Left)	- 6 dB to + 6 dB	0 dB
SW	Subwoofer	- 10 dB to + 10 dB	+ 6 dB

Notes:

!If subwoofer sound is distorted, lower the subwoofer level.

!You can also adjust the speaker level of a subwoofer connected to the SUB- WOOFER PRE OUT socket.

Step 3. Test tone

After adjustments, check the speaker sound by listening to the test tone. (You can readjust the volume level.)

1 Press the AMP SET UP button, and the or button to select "TONE". Then press the ENTER button.

Speakers emit the test tone for 2 seconds in turn, starting with the front speaker (left).

FL CT FR

SW SL SR

2 Readjust the speaker levels if not equal.

Whilst the test tone sounds, press the or button to adjust the level. You can select a speaker by pressing the or button.

Step 4. To end the speaker setting

When you complete the settings, press the AMP RETURN button twice.

SD-AT1000W

ENGLISH

Advanced Features	Adjusting speaker delay/speaker level -
	-

1

2

3

4

5

6

7

8

E-26

04/7/9 SD-AT1000W_LAG_E4.fm TINSZA121AWZZ