Sharp SD-AT1000W Timer and sleep operation, Setting the timer, Before setting timer

Page 28

SD-AT1000W

ENGLISH

Timer and sleep operation

Advanced Features and sleep operation -

You can use the unit as an alarm clock by setting the timer.

Before setting timer:

1Set the unit to the correct time (page 18).

If it is not set, you cannot use the timer function.

2Prepare the sound source for playback.

3Store radio stations (page 20).

"Setting the timer

1 Turn the power on and press the TIMER but- ton.

Set the unit to the correct time if "TIMER STANDBY" does not appear.

2 Within 10 seconds, press theorbutton to

select "TIMER SET", and press the ENTER button.

3 Press theorbutton to adjust the hour and then press the ENTER button.

4 Press the or button to adjust the minutes and then press the ENTER button.

The start time is set and the finish time (1 hour later) will be displayed automati- cally.

5 Set the time to finish as in steps 3 and 4 above.

- Timer

6 Switch input with the or button, and then press the ENTER button.

!When you select the tuner, select a sta- tion by pressing the or button, and then press the ENTER button.

!If a station has not been programmed, "NO P-SET" will be displayed.

DIGITAL1 DIGITAL2

TUNER LINE1

LINE3 LINE2

7 Adjust the volume with the or button and press the ENTER but- ton.

Settings are displayed in order and the unit will enter the timer stand-by mode.

Caution:

This unit cannot set the timer of other equipment.

To perform the timer playback using other equipment, you should also set the timer on the equipment separately.

E-27

04/7/21

SD-AT1000W_LAG_E5.fm

TINSZA121AWZZ

Image 28

Contents SD-AT1000W IntroductionContents Special notesAccessories PrecautionsSD-AT1000WVolume control GeneralControls and indicators IndicatorsInformation Main unit front panelMain unit rear panel General Remote controlControls Sets the VCR power to on or Stops the cassette Switches the input to TV or VCRSelects the DVD menu Displays the DVD menuFront speaker Centre speakerSubwoofer Bass Reflex Duct Woofer Speaker TerminalsSpeaker functions Using antislip speaker cushionsCarrying the subwoofer Speaker connection Connecting speaker wires Installing the AM loop aerialSupplied FM aerial Supplied AM loop aerialAudio connections to DVD players, VCRs, TVs, etc ConnectionsPlayers, VCRs, TVs, etc System connections to DVDUsing other subwoofer SystemAudio connection to TVs or other equip Ment DVD players, VCRs, TVs, etcConnecting the AC power lead AC power leadConnecting To set the unit to stand-by modeSetting the AM/FM interval To change the AM/FM tuning intervalFor Use PreparationSystem installation Preparation for Use System installationPlacing the speaker system Magnetically shielded speakersBattery installation Test of the remote control Remote controlUse Headphones SD-AT1000WGeneral controlMuting UseSetting the clock SD-AT1000WListening to the radio Manual or Auto tuningBasic Operation Listening to the radio Memorising a station To erase all the contents of the preset MemoryTo recall a memorised station Listening to the playback sound from DVD players, VCRs, etc Audio signal indicators / Speaker indicators Enjoying various soundsOperation Various soundsPress the Sound Mode button BasicListening to sounds with multi-channel Ch, etc EnjoyingListening to 2-channel stereo sounds Press the Sound Mode button to turn the Bass on or Bass OFFWhilst the disc is playing, press the Stereo button Adjusting speaker delay/speaker level Advanced FeaturesSpeaker delay setting Adjusting speaker delay/speaker levelSpeaker level setting To end the speaker settingFL CT FR SW SL SR Readjust the speaker levels if not equal Speaker type Level range Default settingTimer and sleep operation Setting the timerTurn the power on and press the Timer but- ton Before setting timerAdvanced Features Timer and sleep operation Setting the sleep timer To use timer and sleep operation togetherTroubleshooting chart Troubleshooting chartSymptom Possible cause Reference ReferencesMaintenance Error indicators and warningsOptional accessory Cleaning the cabinetSpecifications SpecificationsSD-AT1000WLAGmemo1 TINSZA121AWZZ SD-AT1000WLAGmemo2 TINSZA121AWZZ Sharp Corporation