Sharp SD-AT1000W System, Audio connection to TVs or other equip Ment, Using other subwoofer

"Audio connection to TVs or other equip-

ment

You can enjoy surround sound from TVs or other equipment by connecting them to the unit as shown.

To audio output sockets

TV

	Audio signal
To audio	Audio cable
input sockets
	(commercially available)

Audio signal	Other
	equipment
To audio
input sockets
Audio cable	To audio
(commercially
available)	output sockets

Caution:

Turn off all other equipment before making this connection.

Notes:

!Refer to the operation manual of the equipment to be connected.

!Insert the plugs fully to avoid fuzzy pictures or noise.

"Using other subwoofer

For a greater emphasis of bass, a commercially available subwoofer, with a built in amplifier, can be connected to the unit using the SUBWOOFER PRE OUT socket.

Commercially available subwoofer (amplifier built in)

To subwoofer	To subwoofer
	input socket
output socket	Subwoofer signal
	Audio cable
	(commercially available)

Notes:

!No sound is heard from the speaker in which an amplifier is not built in.

!When not using the supplied subwoofer, disconnect the speaker wire from the main unit.

!The speaker delay and level settings are applied to the subwoofer connected to the SUBWOOFER PRE OUT socket (see pages 25 and 26).

SD-AT1000W

ENGLISH

connections	DVD players, VCRs, TVs, etc. -
System	connections to
	- Audio

1

2

3

4

5

6

7

8

E-12

04/7/21 SD-AT1000W_LAG_E2.fm TINSZA121AWZZ