Sharp SD-AT1000W operation manual Listening to 2-channel stereo sounds

Page 25

"Listening to 2-channel stereo sounds

Whilst the disc is playing, press the STEREO button.

You can enjoy the great acoustic effects of the front speakers and subwoofer.

Bass frequencies can be switched in this mode.

Press the SOUND MODE button to turn the "BASS ON" or "BASS OFF".

Each press of the button changes the mode.

Bass frequencies are emphasised.

Bass emphasis is cancelled.

SD-AT1000W

ENGLISH

Notes:

!If "STEREO" or "SURROUND" is selected, the "" indicator goes out.

!Some discs are recorded at 96 kHz of sampling frequency. When this type of disc is played, the sound mode is changed to "STEREO" automatically. The sound mode cannot be changed during playback.

!The monaural sound is heard only from the centre speaker in the "STANDARD" or "SURROUND" mode. If played in the "STEREO" mode, the same sound is repro- duced from the right and left speakers.

!When switching to AM radio, "STANDARD" or "SURROUND" mode auto- matically change to "STEREO" and the "STEREO" indicator is lit. Howev- er, AM broadcasts cannot be received in stereo.

Operation	various sounds -
Basic	- Enjoying

1

2

3

4

5

6

7

8

E-24

04/7/9

SD-AT1000W_LAG_E4.fm

TINSZA121AWZZ

Image 25

Contents SD-AT1000W Special notes IntroductionContentsPrecautionsSD-AT1000W AccessoriesVolume control GeneralIndicators Controls and indicatorsInformation Main unit front panelMain unit rear panel General Remote controlControls Switches the input to TV or VCR Sets the VCR power to on or Stops the cassetteSelects the DVD menu Displays the DVD menuCentre speaker Front speakerSubwoofer Bass Reflex Duct Woofer Speaker TerminalsSpeaker functions Using antislip speaker cushionsCarrying the subwoofer Speaker connection Installing the AM loop aerial Connecting speaker wiresSupplied FM aerial Supplied AM loop aerialConnections Audio connections to DVD players, VCRs, TVs, etcPlayers, VCRs, TVs, etc System connections to DVDSystem Using other subwooferAudio connection to TVs or other equip Ment DVD players, VCRs, TVs, etcAC power lead Connecting the AC power leadConnecting To set the unit to stand-by modeTo change the AM/FM tuning interval Setting the AM/FM intervalFor Use PreparationPreparation for Use System installation System installationPlacing the speaker system Magnetically shielded speakersBattery installation Test of the remote control Remote controlUse SD-AT1000WGeneral control HeadphonesMuting UseSetting the clock SD-AT1000WListening to the radio Manual or Auto tuningBasic Operation Listening to the radio Memorising a station To erase all the contents of the preset MemoryTo recall a memorised station Listening to the playback sound from DVD players, VCRs, etc Enjoying various sounds Audio signal indicators / Speaker indicatorsOperation Various soundsBasic Press the Sound Mode buttonListening to sounds with multi-channel Ch, etc EnjoyingListening to 2-channel stereo sounds Press the Sound Mode button to turn the Bass on or Bass OFFWhilst the disc is playing, press the Stereo button Advanced Features Adjusting speaker delay/speaker levelSpeaker delay setting Adjusting speaker delay/speaker levelTo end the speaker setting Speaker level settingFL CT FR SW SL SR Readjust the speaker levels if not equal Speaker type Level range Default settingSetting the timer Timer and sleep operationTurn the power on and press the Timer but- ton Before setting timerAdvanced Features Timer and sleep operation To use timer and sleep operation together Setting the sleep timerTroubleshooting chart Troubleshooting chartSymptom Possible cause Reference ReferencesError indicators and warnings MaintenanceOptional accessory Cleaning the cabinetSpecifications SpecificationsSD-AT1000WLAGmemo1 TINSZA121AWZZ SD-AT1000WLAGmemo2 TINSZA121AWZZ Sharp Corporation