SMS
Write a SMS
Inbox
Outbox
Draft
SMS settings
Default Center
Important informations are also available on the SMS leaflet in the box
SMS stands for Short Message Service.To benefit from this service you must subscribe to the Caller Line Identification Service (CLI) together with the SMS service from your network provider. SMS messages can be exchanged with a phone (mobile or compatible fixed lines), a fax or an
Email address provided the receiver has also subscribed to the CLI & SMS services.
Your DECT 623/627 factory settings correspond to the main national operator. If you wish to send or receive SMS through another service provider you must set the corresponding numbers (see page 25 and the SMS leaflet).
Write and send new SMS
To write and send an SMS to a phone
Press to reach the menu list and press 
SELECT.
Select Write a SMS option and press 
SELECT.
Enter the text and press 
OK (see page 18).
Note : To delete a wrong character, press 
CLEAR.You can delete and change any
character by simply moving the cursor to the left 
or to the right 
to reach the
character and pressing 
CLEAR once.
If you enter more than 640 characters for an SMS you will hear an error beep.
Enter the phone number and press 
OK or press LSK 
PHBK and
scroll 
to retrieve the number from the Phonebook list (to send SMS from phonebook, see page 30).
Select Send, otherwise
if you want to store your SMS, scroll to Save as Draft and press 
SELECT. The SMS stored can be later retrieved from Draft folder.
The sent SMS can be up to a maximum of 640 characters long.The DECT 623/627 can store 20 SMS messages of 160 characters each in the draft folder and in the Outbox.
SMS | 19 |