Philips DECT 627, DECT 629 manual Registration, To reset to default settings, To register a handset

Page 44

Registration

Up to 5 handsets can be registered to the base station.

Warning : If you wish to register non Philips handsets to the DECT 623 or DECT 627 base station, make sure that this handset is GAP compliant otherwise it will not operate properly (see page 11).

To register a handset

If you have inadvertently unregistered your handset, you can register it again. Additional handsets must be registered to the base before use.

To register a handset, first press the paging key on the base for approx. 5 seconds when the base is in idle mode.Then carry out the following steps on the handset within one minute :

Press to reach the menu list.

Scroll to Adv. Settings and press	SELECT.
Scroll to Registration and press	SELECT.
Enter the 4-digit PIN code (by default “0000”) and press		OK.

If the registration was successfull, a long confirmation tone is heard and the handset number (1 to 5) will be assigned by the base automatically.

To unregister a handset

Press to reach the menu list.

Scroll to Adv. Settings and press SELECT.

Scroll to Unregistration and press SELECT.

Choose the handset to unregister from the list and press SELECT.

Note : If you have your handset serviced, please make sure it is unregistered from the base station befo- re taking it back to the repair centre.

To reset to default settings

You can reset your phone to the default settings (see page 51) at any time. Note that after a reset all your personal settings and saved data (phonebook entries, SMS messages, call log and redial list) will be deleted.

Press to reach the menu list.

Scroll to Adv. Settings and press SELECT.

Scroll to Reset and press SELECT.

Select Yes to reset your phone and press SELECT.

Note : After a reset you need to reconfigure your phone, refer to page 40.

Advanced Settings

43

Image 44

Contents Page Gation key to access the Call log Quick start guide / understanding the menu systemMicrophone Dect 623/DECT 627 HandsetEarpiece Icons on the handset display Icons on the base displayDect 623 base station Dect 627 base stationTable of contents Default settings Call logRedial list IntercomMenu structure Menu structureLanguage list Contextual soft key labels Conformity,environment and safety Using GAP standard compliance Declaration of conformityInstalling the Dect 623/627 Unpacking your DectBattery life and range Installing the base stationInstalling and replacing the batteries in the handset Configuration mode Handset power OFF and onKeypad lock/unlock Your phone is ready to be usedUnderstanding the menu system Idle modeIntroduction Basic principles In-call features Case mode Editing systemStandard multi-tap system To write Peter with multi-tapWrite and send new SMS To write and send an SMS to a phoneView SMS To read an SMS by using the Call logTo read an SMS by using the Inbox menu Inbox To reply to an SMS for received SMSTo edit and send again an SMS for received SMS To save a sender number in the phonebookOutbox To delete an SMS from the InboxTo delete all SMS from the Inbox To review sent messagesTo resend an Outbox message To save a sent SMS as DraftTo delete an SMS from the Outbox To delete all SMS from the OutboxDraft folder To edit and send an SMS stored in the draft folderTo delete an SMS from the Draft folder To delete all SMS from the Draft folderSMS settings To set the default SMS centerScroll to Default Center and press Select To set the SMS centre numbersAlarm Clock & AlarmTo set the alarm clock ON/OFF Date & TimeTo set the alarm tone Current alarm tone is heardNew Entry PhonebookGroup ring tone To enter a new entry in the phonebookView To store a number from redial list in the phonebookTo store a number from call log in the phonebook Navigation in the phonebookTo call To send an SMS from the phonebookClear once Phonebook listTo delete whole phonebook list To edit an entryTo delete an entry Call log To view the call logTo call / redial Select Copy to PhbkTo delete a name or a number To delete all call log entriesTo store a number from redial in the phonebook Redial listTo view the redial list To delete a name or a number from redial list To delete whole redial listCall transfer to a specific handset when on line Switch between internal and external callInternal call Incoming external call during an intercom callConference call via the in-call options Handset Tones WallpaperContrast To activate / deactivate the key tone To set the handset ring toneTo set the group ring tones Language Handset nameAuto Answer Dial Mode Adv. SettingsTo change the dial mode Flash TimeVoice Language SecurityTo set the voice language To change the PIN codeTo reset to default settings RegistrationTo register a handset To unregister a handsetNet Service Example of service Call forwardTo activate / deactivate Services Select Activate or Deactivate and press SelectAnswer machine Dect Dect 627 answer machine keysTo switch the Dect 627 Telephone Answer Machine ON/OFF Saved messagesDect 627 answer machine display To listen to new messagesVolume adjustment Answer machine settingsDelete answer machine messages To delete an answer machine messageSequence 2 To set the number of rings before answering To record your personal outgoing message Sequence 4 To change the remote control access codePersonal outgoing messages To play back personal or default outgoing message Record and listen to a memoTo delete personal outgoing message To record a memoDefault settings To remotely control your answer machineTo remotely control your answer machine Only DectFAQ FAQ Problems Problems Causes Solutions Index PABX/PSTN