Olympus PT-018 manual Explanation

Page 7

●Do not use the following chemicals for cleaning, corrosion prevention, prevention of fogging, repair or other purposes. When these are used for the Case directly or indirectly (with the chemicals in vaporized state), they may cause cracking under high pressure or other problems.

Chemicals which cannot be used

Explanation

Volatile organic solvents,

Do not clean the Case with alcohol, gasoline, thinner

or other volatile organic solvents or with chemical

chemical detergents

detergents etc. Pure water or lukewarm water is

 

sufficient.

 

 

 

Do not use anticorrosion agents. The metal parts use

Anticorrosion agent

stainless steel or brass, and washing with pure water

 

is sufficient.

Commercial defogging

Do not use commercial defogging agents. Always

agents

use the specified desiccant silica gel.

 

 

Grease other than specified

Use only the specified silicone grease for the silicone

silicone grease

O-ring, as otherwise the O-ring surface may

deteriorate and water leakage may be caused.

 

 

Do not use adhesive for repairs or other purposes.

Adhesive

When repair is required, please contact a dealer or a

 

service station of our company.

●Do not perform operations other than specified in this instruction manual, do not remove or modify parts other than specified, and do not use parts other than specified.

Any troubles in taking pictures or with the equipment resulting from the above actions shall be outside the guarantee.

●Our company shall be in no way responsible for accidents involving immersion of a digital camera in water.

●Our company shall not pay any compensation for accidents (injury or material damage) at the time of use.

●When the enclosure of the balance weight breaks, the metal on the inside may corrode. Take care not to damage the enclosure.

●After use, wash the balance weight with pure water and wipe off all moisture sufficiently.

E-6

Image 7
Contents PT-018 Please read the following items before use IntroductionFor safe use ・Injury by dropping onto the body from a height Batteries For Prevention of Water Leakage Accidents Handling the Product Explanation Contents Handling After Shooting………………………………E-23 Taking Pictures Under Water ………………………E-22Maintaining the Waterproof Function …………E-26 Preparations Check the contents of the packageNames of the parts Master the basic operation Install the strapHolding the Case How to Use the Mode Dial How to Press the ShutterHow to Use the Zoom Lever Power Switch Operation Method Setting the Zoom LeverFlash Operation Method Advance Test Advance test before useLoading in the Case Which digital cameras can be loaded? Battery ConfirmationCheck the digital camera Remove the hand/neck strap from the digital cameraCheck the operation of the camera Open the Case Pull the mode dial of the CaseLoad the digital camera Insertion of silica gel Set the mode dialCheck the loading status Install the special balance weightSeal the Case Removal Installation and Removal of the LCD HoodPerform the final checks Visual Inspection Set the power to onTry to move the mode dial Mounting and Removing the Lens CapConfirmed easily Final TestQuietly press the shutter lever How to Use the Hand StrapWipe off any waterdrop Handling After ShootingTake out the digital camera Dry the Case Wash the Case with pure waterRemove any sand, dirt, etc Remove the O-ringInstall the O-ring Replace consumable products How to Apply Grease to the O-ringOn the use of the PT-018 AppendixPage Q6:How should I take pictures under water? Page Q11:Please tell me about repairs After-sale Service Specifications Memo Memo Coffret étanche Veuillez lire la suite avant utilisation IntroductionPour une utilisation sûre Avertissement Batteries Pour éviter des accidents de fuite deau Manipulation du produit Des détergents Table des matières Page Contrôle du contenu de lemballage Préparatifs※⑭ Touche OK/Menu Fenêtre de Iécran ACL ③ Crochet de boucle Nomenclature des piècesMaîtriser le fonctionnement de base Mise en place de la courroieTenue du coffret Comment appuyer sur le déclencheur Comment utiliser la molette ModeComment utiliser le levier de zoom Fonctionnement de linterrupteur dalimentation Réglage du levier de zoomFonctionnement du flash Test préliminaire avant utilisation Contrôle préliminaire du coffretTest préliminaire Mise en place de lappareil photo numérique Ouvrir le coffret Relever la molette Mode du coffretCharger lappareil photo numérique Introduction du gel de silice Régler la molette ModeContrôler létat de chargement Installer le contrepoids spécialSceller le coffret Retrait Mise en place et retrait de la coiffe de lécran ACLRégler lalimentation sur on Essayer de déplacer la molette ModeMontage et retrait du bouchon dobjectif Effectuer les contrôles finaux Inspection visuelleÊtre vues facilement Test finalPrécautions en utilisant le flash Prise de vues sous leauUtilisation de la courroie Appuyer doucement sur le levier de déclencheurEssuyer toute goutte deau Manipulation après la prise de vueSortir lappareil photo numérique Sécher le coffret Laver le coffret avec de leau pureRetirer tout grain de sable, poussière, etc Maintien de la fonction détanchéitéRetirer le joint Retrait du jointInstaller le joint Changer les pièces consommables Comment appliquer de la graisse sur le jointSur lutilisation du PT-018 AnnexePage Page Page Page Service après-vente Fiche technique Memo Memo Caja hermética al agua Lea los puntos siguientes antes del uso IntroducciónPara un uso seguro Advertencia Pilas Para la prevención de accidentes por filtración de agua No aplique una fuerza excesiva a la rosca del trípode Manipulación del productoAgentes Para la prevención de accidentes por filtración de agua ContenidosPage Verifique los contenidos del paquete PreparacionesNombre de las partes Aprenda la operación básica Coloque la correaSosteniendo la caja Cómo usar el disco de modo Cómo presionar el disparadorCómo usar la palanca del zoom Método de operación del interruptor de alimentación Ajustando la palanca del zoomMétodo de operación de flash Prueba anticipada antes del uso Verificación anticipada de la cajaPrueba anticipada Instale la cámara digital Tire hacia arriba el disco de modo de la caja Abra la cajaColoque la cámara digital Inserción de silicagel Ajuste el disco de modoSelle la caja Verifique la condición de colocaciónInstale el contrapeso especial Extracción Instalación y retiro del visera de LCDTrate de mover la perilla de modo Colocando y retirando la tapa del objetivoRealice las verificaciones finales Inspección visual Active la alimentación ajustando a onAgua Ser fácilmente confirmadas Prueba finalPrecauciones cuando utiliza el flash Tomando fotos debajo del aguaCómo usar la correa de mano Presione suavemente la palanca del disparadorLimpie secando todo vestigio de agua Manipulación después de la toma fotográficaSaque afuera la cámara digital Seque la caja Lave la caja con agua puraRetire la junta tórica Manteniendo la función de hermeticidad al aguaQuite toda arena, suciedad, etc Coloque la junta tórica Reemplace las partes consumibles Cómo aplicar grasa a la junta tóricaPreguntas y repuestas sobre el uso de la PT-018 ApéndiceP5 ¿Cómo debe ser manipulada la caja después de usarse? Page R10 Observe los ítemes siguientes Page Servicio posterior a las ventas Especificaciones WeightMemo Memo Memo Olympus America INC

PT-018 specifications

The Olympus PT-018 is a well-regarded underwater housing designed specifically for the Olympus digital cameras, providing enthusiasts and professionals alike with the ability to capture stunning images and videos beneath the waves. This product represents a merging of innovative technology and practical design, allowing users to explore the underwater world without sacrificing the performance of their camera.

One of the standout features of the PT-018 is its robust construction, designed to withstand the pressures associated with underwater photography. The housing can accommodate depths of up to 40 meters, making it suitable for recreational diving and snorkeling. Crafted from durable materials, the housing is both lightweight and rugged, providing peace of mind that the camera is safe and secure while capturing aquatic adventures.

The housing is designed with user accessibility in mind. It features a clear, optical viewfinder that brings clarity to composition and framing even in challenging lighting conditions underwater. Controls for the camera are intuitively placed, allowing for easy adjustments while submerged. The well-placed buttons and dials ensure that photographers can operate their cameras without needing to remove the housing, which is crucial for capturing spontaneous moments.

A significant technological advantage of the PT-018 is its ability to support various wide-angle and macro lens attachments, providing users with a range of creative options for their photography. This adaptability allows photographers to experiment with different perspectives and techniques, from expansive underwater landscapes to intimate close-up shots of marine life.

Additionally, the housing is designed to prevent water ingress, featuring O-rings and seals that help maintain the integrity of the equipment even in challenging conditions. The transparent polycarbonate construction provides excellent visibility while minimizing weight, making it easier to handle during underwater excursions.

The PT-018 also incorporates practical features such as a tripod socket, making it convenient to mount the housing on a tripod or stabilizer for added stability during capture. The housing also includes a lens port that accommodates different filters which can enhance image quality by adjusting for color temperature and reducing backscatter.

In summary, the Olympus PT-018 is a versatile and reliable underwater housing, perfect for those looking to immerse themselves in the art of underwater photography. With its durable construction, intuitive controls, and compatibility with various lenses, it empowers users to capture breathtaking imagery that showcases the beauty of aquatic environments. Whether you're a seasoned diver or a casual snorkeler, the PT-018 enables you to explore and immortalize the wonders found beneath the surface.