Sony MDS-PC3 specifications Record Precedure

Page 7

Iop DATA RECORDING AND DISPLAY WHEN OPTICAL PICK-UP AND NON-VOLATILE MEMORY (IC195 OF BD BOARD) ARE REPLACED

The Iop value labeled on the optical pick-up can be recorded in the non-volatile memory. By recording the value, it will eliminate the need to look at the value on the label of the optical pick-up. When replacing the optical pick-up or non-volatile memory (IC195 of BD board), record the Iop value on the optical pick-up according to the following procedure.

Record Precedure:

1.While pressing the AMS knob and x/Z button, connect the power plug to the outlet, and release the AMS knob and x/Z button.

2.Rotate the AMS knob to display “[Service]”, and press the @/1 button.

3.Rotate the AMS knob to display “Iop Write” (C05), and press the @/1 button.

4.The display becomes “Ref=@@@.@” (@ is an arbitrary number) and the numbers which can be changed will blink.

5.Input the Iop value written on the optical pick-up.

To select the number : Rotate the

AMS

 

knob.

To select the digit : Press the

 

 

 

knob.

AMS

6.When the @/1 button is pressed, the display becomes “Measu=@@@.@” (@ is an arbitrary number).

7.As the adjustment results are recorded for the 6 value. Leave it as it is and press the @/1 button.

8.“Complete! !” will be displayed momentarily. The value will be recorded in the non-volatile memory and the display will become “Iop Write” (C05).

9.Press the x/Z button to complete, remove the power plug to the outlet.

Display Precedure:

1.While pressing the AMS knob and x/Z button, connect the power plug to the outlet, and release the AMS knob and x/Z button.

2.Rotate the AMS knob to display “[Service]”, and press the @/1 button.

3. Rotate the AMS knob to display “Iop Read” (C26), and press the @/1 button.

4.“@@.@/##.#” is displayed and the recorded contents are displayed. @@.@ : indicates the Iop value labeled on the pick-up.

##.# : indicates the Iop value after adjustment

5.To end, press the AMS button or x/Z button to display “Iop Read” (C26), remove the power plug to the outlet.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents MDS-PC3 SpecificationsTOC t Edit t TOC Edit t blank t SELF-DIAGNOSIS FunctionItems of Error History Mode Items and Contents Table of Error Codes Table of ContentsDisassembly DiagramsFlexible Circuit Board Repairing Section Service NotesLead free soldering JIG for Checking BD Board Waveform Record Precedure Forced Reset Checks Prior to Parts Replacement and AdjustmentsMain Board Component Side Bit Binary Retry Cause Display ModeHexadecimal t Binary Conversion Table General Section Remote Parts DescriptionUsing the Display Hooking Up MD Mechanism Deck MDM-7A Section DisassemblyOver Light Head HR901, BD MD Board Main BoardLoading Motor Assy M103 Holder AssyOptical PICK-UP MD KMS-260B/JIN Sled Motor Assy M102, SliderSpindle Motor Assy M101 Exiting the Test Mode Section Test ModePrecautions for USE of Test Mode Setting the Test ModeDisplay Details Mark Group Selecting the Test ModeOperating the Continuous Playback Mode Functions of Other Buttons Test Mode DisplaysMode display Error rate displayAutomatic SELF-DIAGNOSIS Function Meanings of Other DisplaysInformation Parts Replacement and Adjustment Section Electrical AdjustmentsCheck before replacement Adjustment flow Precautions for USE of Optical PICK- UP KMS-260B Precautions for Checking Laser Diode EmissionPrecautions for Adjustments Checks Prior to Repairs Using the Continuously Recorded DiscOther Checks Auto CheckCD Error Rate Check Play Check MO Error Rate CheckTemperature Compensation Offset Adjutment Initial Setting of Adjustment ValueLaser Power Adjustment Iop NV Save Traverse AdjustmentFocus Bias Adjustment MO Auto Gain Control Output Level Adjustment Error Rate CheckAuto Gain Control Output Level Adjustment CD Auto Gain Control Output Level AdjustmentAdjusting Points and Connecting Points Diagrams MDS-PC3 Block Diagrams BD SectionSclk Cclk Main SectionSemiconductor Printed Wiring Board BD SectionPIN Function MDS-PC3 Printed Wiring Board Main Section PIN Functon MDS-PC3 Printed Wiring Board Panel Section Schematic Diagram Panel Section See page 35 for Waveforms IC101 CXA2523AR BD Board IC Block DiagramsLB1830M-S-TE-L Main Board BH3541F-E2 Main Board IC101 CXA2523AR RF Amplifier BD Board IC PIN FunctionsMNT0 FOK Mvci IC300 M30805SGP Main Board Shck MNT1 Chassis Section Section Exploded Views319 302 320 317 304 308 303 305 306 301 318 307 Mechanism MDM-7A351 MechanismRemarks Ref. No Description Section Electrical Parts ListMetal Chip Main PIN, Connector 2P Diode Main Panel KEY REFLECT/PROTECT SW MDS-PC3 Panel
Top Page Image Contents