Sony Ericsson LBI-38965 Operator Functions, Database Elements, Default Data, Unit Data

Page 14

LBI-38965

The three configuration files can be created by running BCS on a BCU/CAL used as a master. Then, these files can be copied to the appropriate directory (1.2/cnfg) on a target BCU, and the target will assume the same configuration values. Changes specific to the target must be made either by running BCS on the target or by making the changes on the master, copying the configuration files to the target, then reversing the changes to restore the master to its baseline configuration.

NOTE

To copy or delete the configuration files from a BCU/CAL, you must NOT be running BCS on that system. BCS keeps all the configuration files open while it is running, thereby preventing them from being deleted or overwritten.

3.2.3.8. Operator Functions

An EDACS system operator is able to perform the following functions locally or remotely using a terminal interface program running on the BCU/CAL:

∙Input of default configuration database.

∙Default pseudo hang time.

∙Default group billing mode.

∙Input of configuration data for individual LIDs and/or GIDs to override the default configuration database. (Configuration data may be input for an individual ID or range of IDs.)

-LID pseudo hang time.

-GID pseudo hang time.

-GID group billing mode.

∙Creation of a magnetic tape archive of CDRs.

∙Transfer CDR files from the hard drive to the floppy drive.

Refer to LBI-38967 for a detailed explanation of the available operator functions.

3.2.3.9.Database Elements

This section describes the elements of the BCU's configuration database.

Default Data

A set of subscriber default attributes maintained on the system contains the following information:

1.Default unit pseudo hang time (seconds)

2.Default group pseudo hang time (seconds)

3.Default group billing mode (caller or group)

4.Default data call pseudo hang time (seconds)

Unit Data

Each subscriber can be assigned a record in the subscriber attribute database. This record contains the following information: Pseudo_Hang-Time (seconds).

Group Data

Each group defined on the system shall be assigned a record in the subscriber attribute database containing the following information:

1.Group pseudo hang time (seconds)

2.Billing mode (group or caller)

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents System and Installation Manual Table of Contents LBI-38965Table of Contents Introduction BCU/CAL ArchitectureCall Types Supported BCU Functional DescriptionCAL Functional Description Physical Specifications Physical Description and CompatibilityBCU/CAL Architecture TVME147 CPUCPU Compatibility Backwards CompatibilityBCU Operational Specifications SpecificationsCommon BCU and CAL Operational Specifications Billing Architecture Billing Architecture BCU Operation OverviewConversations Group Billing ModeRF Channel Usage Air Time Grouping CallsFile Name Contents Database Elements Default DataOperator Functions Unit DataCDR Processing CDR Processing ErrorsCall Processing Call Processing CDR OutputProtocol Supported CAL Operational SpecificationsSystem Manager Interface Additional Product Features Network File System CAL Operation OverviewInstallation Hardware InstallationSoftware Installation Installation Contents DisketteFile Name Usage Parameter MeaningEXPORTS.DAT Configuration File ParameterCAL.DAT Configuration File Directory Clientip EXPORTS.DAT File ParametersCAL.DAT File Parameters SITE01Initial Installation PrerequisitesInstallation Return Login Password Access Level First-Time ConfigurationDefault System Accounts Prerequisite User Information Entering bcs invokes the BCS programSystem Disk Booting Proper System Shutdown User Information Invoke the BCS programCAL Terminal Server Configuration Software UpgradesExample Configuration Tips Page Appendix a Edacs Billing CDR Format Billing for Multiple Sites OverviewBilling by Conversation Record EncodingMULTIPLE-SITE Calls Record LayoutSINGLE-SITE Calls MOBILE-TO-LAND Telephone Interconnect CallsTable A.1 Call Detail Record Field Descriptions Name Size Format Range/Values DescriptionCall Type Description Valid with Hex Decimal Rec. Type Call Type DefinitionsTable A.2 Call Types A0-FF Call Type Bit Fields Table A.3 Call Type Bit Field DefinitionsCDR File Topics Appendix B Physical Configuration Details Jumper Settings Figure B.1 Tvme 147SA1 Single-Board Computer Figure B.2 Tvme 712/M Transition Module Figure B.4 fv5310 Main Board Figure B.5 fv5310 Mezzanine Card Scsi Connector Pwr Table B.1 WANServer Port DB-25F Signal Name Function ConnectorCable Pinouts Table B.2 WANServer PortTable B.3 WANServer Port Table B.4 WANServer PortTable B.5 BCU/CAL Hdlc Loopback Cable Specification DB-25M Connector Signal Name Function BCU/CAL PortFigure B.9 CAL Terminal Server to Distribution Panel Cable A14 INM AC H106 Computer Terminal Appendix C Fault Tolerance Figure C.1 Edacs Billing Fault Tolerant Architecture Redundant Operation
Top Page Image Contents