Sony Ericsson LBI-38965 installation manual Directory Clientip EXPORTS.DAT File Parameters

Page 22

LBI-38965

Export entries are specified in the following form:

directory

client_ip

 

 

Table 5 - EXPORTS.DAT File Parameters

 

 

 

Parameter

 

Meaning

directory

 

Directory structure(s) to be exported. Must be a fully specified, valid directory on the BCU/CAL

 

 

system disk (volume 1.2). Note that directories are case-sensitive.

 

 

Specifying the BCU/CAL root directory (1.2/) indicates that the entire volume may be mounted

 

 

by the host specified by client_ip.

client_ip

 

Internet address of the NFS client permitted to mount directory, specified in dotted-decimal

 

 

notation. If no address is specified, it indicates that any client may mount the directory.

 

 

 

The examples below show several valid export entries in the EXPORTS.DAT file:

#######################################################################

#In the following example, hosts `fallwell and `hagee may NFS mount

#the entire BCU/CAL system disk (volume 1.2).

#Host `robertson may only mount the BCU/CAL cdr directory.

#Any host may mount the log directory.

#######################################################################

1.2/

147.117.37.245

# host name - fallwell

1.2/

147.117.37.248

# host name

- hagee

1.2/cdr

147.117.37.249

#

host name

- robertson

1.2/log

 

#

any client may mount

4.2.1.1.4. CAL.DAT Configuration File

The CAL.DAT is a mandatory file for execution of the CAL software feature. It defines the interface parameters between the BCU/CAL and the System Manager. The template file defines 32 example sites, which are commented out (i.e., preceded with a # character) and thus have no effect when the file is processed. Entries must be provided for each site interface the CAL will be supporting. The information contained in the CAL.DAT file must also be used to properly configure the Emulex Terminal Server(s). Terminal server configuration is discussed in detail in a separate section of this document.

EDACS System Manager site entries are specified in the following form:

SITE.ss.PASSWD system_manager_password

SITE.ss.IPterminal_server_ip

SITE.ss.PORT tcp_port_number

where ss designates the associated site number, ranging from 01 to 32 (inclusive). The site number in CAL should correspond to the site number of the System Manager port to which it will be connected.

A log file (1.2/log/cal_ini.log) is generated on each system boot. This log summarizes the processing of this file, indicating which sites are supported, the values assigned as PASSWD, IP, and PORT for each site, and any errors encountered in processing CAL.DAT.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents System and Installation Manual Table of Contents LBI-38965Table of Contents Introduction BCU/CAL ArchitectureCAL Functional Description BCU Functional DescriptionCall Types Supported Physical Specifications Physical Description and CompatibilityBCU/CAL Architecture TVME147 CPUCPU Compatibility Backwards CompatibilityCommon BCU and CAL Operational Specifications SpecificationsBCU Operational Specifications Billing Architecture Billing Architecture BCU Operation OverviewConversations Group Billing ModeRF Channel Usage Air Time Grouping CallsFile Name Contents Database Elements Default DataOperator Functions Unit DataCDR Processing CDR Processing ErrorsCall Processing Call Processing CDR OutputSystem Manager Interface CAL Operational SpecificationsProtocol Supported Additional Product Features Network File System CAL Operation OverviewInstallation Hardware InstallationSoftware Installation Installation Contents DisketteFile Name Usage Parameter MeaningEXPORTS.DAT Configuration File ParameterCAL.DAT Configuration File Directory Clientip EXPORTS.DAT File ParametersCAL.DAT File Parameters SITE01Initial Installation PrerequisitesInstallation Return Default System Accounts First-Time ConfigurationLogin Password Access Level Prerequisite User Information Entering bcs invokes the BCS programSystem Disk Booting Proper System Shutdown User Information Invoke the BCS programCAL Terminal Server Configuration Software UpgradesExample Configuration Tips Page Appendix a Edacs Billing CDR Format Billing for Multiple Sites OverviewBilling by Conversation Record EncodingMULTIPLE-SITE Calls Record LayoutSINGLE-SITE Calls MOBILE-TO-LAND Telephone Interconnect CallsTable A.1 Call Detail Record Field Descriptions Name Size Format Range/Values DescriptionTable A.2 Call Types Call Type DefinitionsCall Type Description Valid with Hex Decimal Rec. Type A0-FF Call Type Bit Fields Table A.3 Call Type Bit Field DefinitionsCDR File Topics Appendix B Physical Configuration Details Jumper Settings Figure B.1 Tvme 147SA1 Single-Board Computer Figure B.2 Tvme 712/M Transition Module Figure B.4 fv5310 Main Board Figure B.5 fv5310 Mezzanine Card Scsi Connector Pwr Table B.1 WANServer Port DB-25F Signal Name Function ConnectorCable Pinouts Table B.2 WANServer PortTable B.3 WANServer Port Table B.4 WANServer PortTable B.5 BCU/CAL Hdlc Loopback Cable Specification DB-25M Connector Signal Name Function BCU/CAL PortFigure B.9 CAL Terminal Server to Distribution Panel Cable A14 INM AC H106 Computer Terminal Appendix C Fault Tolerance Figure C.1 Edacs Billing Fault Tolerant Architecture Redundant Operation
Top Page Image Contents