Sony Ericsson LBI-38965 installation manual CAL.DAT File Parameters, SITE01

Page 23

 

 

LBI-38965

 

 

Table 6 - CAL.DAT File Parameters

 

 

 

 

 

Parameter

Meaning

 

 

SITE.ss.PASSWD

Specifies the System Manager password to be used for logins to/from this site.

 

 

 

system_manager_password must match the associated value programmed on the System

 

 

 

Manager for the site specified by ss.

 

 

SITE.ss.IP

Defines the Internet IP address, in dotted-decimal notation, of the Emulex Terminal server

 

 

 

for the site specified by ss. Note that the address terminal_server_ip should be chosen to be

 

 

 

on a directly connected network with the BCU/CAL IP address (as specified in IP.DAT).

 

 

SITE.ss.PORT

Defines the TCP/IP port number used to communicate between the BCU/CAL and the

 

 

 

associated port on the terminal server. Note that each terminal server port is associated with

 

 

 

the site number specified by ss. The value tcp_port_number must be unique for every site

 

 

 

defined.

 

 

 

 

 

The following example shows how sites 1 and 2 might be defined in the CAL.DAT file.

#######################################################################

#######################################################################

SITE.01.PASSWD

SITE01

# System Manager Password for the site

SITE.01.IP

147.117.37.10

# IP address of the terminal server

SITE.01.PORT

5001

# TCP port number

SITE.02.PASSWD

SITE02

 

SITE.02.IP

147.117.37.10

 

SITE.02.PORT

5002

 

Configuration Tips

The TCP port number selection can be of significance if the BCU/CAL is attached to a large or TCP protocol intensive network. If you are unsure of TCP port usage on your network, consult you network administrator prior to assigning these values. In general, beginning TCP port definition at 5000 is safe for most applications. A convenient rule of thumb is to start at 5000, with the lower digits of the port reflecting the associated site number. For example, use TCP port number 5010 for site 10.

The parameters defined in CAL.DAT must be known when the Emulex terminal servers are to be configured. Have a hard copy of this file available when you are ready to set up the terminal servers.

The System Manager must be properly configured to recognize the sites that the BCU/CAL is simulating. Be sure that these sites have been defined and the passwords are correct prior to connection establishment attempts between the System Manager and the BCU/CAL.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents System and Installation Manual LBI-38965 Table of ContentsTable of Contents BCU/CAL Architecture IntroductionCall Types Supported BCU Functional DescriptionCAL Functional Description Physical Description and Compatibility Physical SpecificationsTVME147 CPU BCU/CAL ArchitectureCPU Backwards Compatibility CompatibilityBCU Operational Specifications SpecificationsCommon BCU and CAL Operational Specifications Billing Architecture BCU Operation Overview Billing ArchitectureGrouping Calls Group Billing ModeRF Channel Usage Air Time ConversationsFile Name Contents Unit Data Default DataOperator Functions Database ElementsCall Processing CDR Output CDR Processing ErrorsCall Processing CDR ProcessingProtocol Supported CAL Operational SpecificationsSystem Manager Interface CAL Operation Overview Additional Product Features Network File SystemHardware Installation InstallationInstallation Contents Diskette Software InstallationParameter Meaning File Name UsageParameter EXPORTS.DAT Configuration FileDirectory Clientip EXPORTS.DAT File Parameters CAL.DAT Configuration FileSITE01 CAL.DAT File ParametersPrerequisites Initial InstallationInstallation Return Login Password Access Level First-Time ConfigurationDefault System Accounts User Information Entering bcs invokes the BCS program PrerequisiteSystem Disk Booting User Information Invoke the BCS program Proper System ShutdownSoftware Upgrades CAL Terminal Server ConfigurationExample Configuration Tips Page Appendix a Edacs Billing CDR Format Record Encoding OverviewBilling by Conversation Billing for Multiple SitesMOBILE-TO-LAND Telephone Interconnect Calls Record LayoutSINGLE-SITE Calls MULTIPLE-SITE CallsName Size Format Range/Values Description Table A.1 Call Detail Record Field DescriptionsCall Type Description Valid with Hex Decimal Rec. Type Call Type DefinitionsTable A.2 Call Types A0-FF Table A.3 Call Type Bit Field Definitions Call Type Bit FieldsCDR File Topics Appendix B Physical Configuration Details Jumper Settings Figure B.1 Tvme 147SA1 Single-Board Computer Figure B.2 Tvme 712/M Transition Module Figure B.4 fv5310 Main Board Figure B.5 fv5310 Mezzanine Card Scsi Connector Pwr Table B.2 WANServer Port DB-25F Signal Name Function ConnectorCable Pinouts Table B.1 WANServer PortTable B.4 WANServer Port Table B.3 WANServer PortDB-25M Connector Signal Name Function BCU/CAL Port Table B.5 BCU/CAL Hdlc Loopback Cable SpecificationFigure B.9 CAL Terminal Server to Distribution Panel Cable A14 INM AC H106 Computer Terminal Appendix C Fault Tolerance Redundant Operation Figure C.1 Edacs Billing Fault Tolerant Architecture
Top Page Image Contents