Siemens M35 or S35, C35i manual Contents of Delivery

1.2. Contents of Delivery

				Sets
Label		Component description	051GB010	051GB010A	051GB011	051GB011A
GB 051 010		GSM Remote Control only	●	●
GB 051 011		GSM Remote Control with the Siemens C35i mobile phone			●	●
SA 012 602		AC/DC Adapter 220 V / 12 V DC, 600 mA, cable 1,5 m long		●		●
		Connector	●	●	●	●
13 004 027		Siemens C35i mobile phone only	○	○
13 004 028		External FME antenna reduction cable for the	○	○	○	○
		Siemens C35i mobile phone
ED 001 001		External 3 dB antenna with magnet, 3 meter cable	○	○	○	○
ED 001 002		Flat external antenna to be glued -on glass or plastic	○	○	○	○
ED 051 011		Converter for connection between a PC and the GB	○	○	○	○
		051 k PC, configuration software included
ED 051 050		Connector reduction for the ED 050 001 converter	○	○	○	○
01 002 008		NiMH battery for the Siemens C35i mobile phone	○	○	○	○
ED 050 300		Double power switch 230 V / 5 A	○	○	○	○
ED 050 400		Motion detector	○	○	○	○
ED 050 401		Motion detector with remote control	○	○	○	○
ED 060 601		Push button connectable into a panel	○	○	○	○
Note:	(●) included in the predefined set
	(○) optional accessory for the product type

2.Safety Commands

•GB 051 is conformable with technical standards for operation in our mains.

•Power source with voltage 10–16 V DC must be used for power supply. Dimension for peak current is 500mA.

•While cover is removed parts under voltage can be exposed. Device must be disconnected from all power sources including backup battery before maintenance or exchange of parts or filled boards.

•While fitting together and assembling the equipment avoid cut-off of interconnecting cables or their damage by edges.

•No fluids must enter the device. Danger of fire, destruction of device or injury by electric current impend. In case it occurs pull power source out of the plug immediately and consult specialist.

•Avoid forceful mechanic stress of device.

•Do not place device into rooms with high temperatures, strong vibrations or high humidity.

•In case you moved device from cool to warm room do not set it into operation immediately. Water condenses on device and operation under these circumstances can cause damage of device. Let device warm up to temperature of room. Wait until condensed water evaporates.

5