PREFACE | 06 Apr 2000 | PAGE 3 |
|
|
Warnings, Cautions, and Notes as Used in this Publication
Warning
Warning notices are used in this publication to emphasize that hazardous voltages, currents, temperatures or other conditions that could cause personal injury exist in this equipment or may be associated with its use.
In situations where inattention could cause either personal injury or damage to equipment, a Warning notice is used.
Caution
Caution notices are used where equipment might be damaged if care is not taken.
Note
Notes merely call attention to information that is especially significant to understanding and operating the equipment.
This document is based on information available at the time of its publication. While efforts have been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware or software, nor to provide for every possible contingency in connection with installation, operation, or maintenance. Features may be described herein which are not present in all hardware and software
systems. GE Fanuc Automation assumes no obligation of notice to holders of this document with respect to changes subsequently made.
GE Fanuc Automation makes no representations or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of the information contained herein. No warranties of merchantability or fitness for purpose shall apply.
The following are trademarks of GE Fanuc Automation North America, Inc.
Alarm Master | CIMSTAR | Helpmate | PROMACRO | Series Six |
CIMPLICITY | GEnet | Logicmaster | Series One | Series 90 |
CIMPLICITY 90 – ADS | Genius | ModelMaster | Series Three | VuMaster |
CIMPLICITY Power TRAC | Genius PowerTRAC | ProLoop | Series Five | Workmaster |
The following are trademarks of Horner Electric, APG, LLC.
Cscape | SmartStack | CsCAN |
Copyright 2000 GE Fanuc Automation North America, Inc. All Rights Reserved