Weslo WLTL49806.0 user manual Information Mode

Page 19

5 Follow your progress with the display.

See step 6 on pages 14 and 15.

6 Measure your heart rate if desired.

See step 7 on page 15.

7 Turn on the fan if desired.

See step 8 on page 15.

When the program is completed, remove the

8 key from the console.

See step 9 on page 15

THE INFORMATION MODE

The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is se- lected, the following information will appear in the dis- play:

The upper display will show the total number of thou- sands of steps taken by all users of the treadmill. For example, the

number 316 would indicate 316,000 steps taken.

The center of the display will show

the number of hours that the treadmill has been operated. The

lower right corner

of the display will show the total number of miles or kilo- meters that the walking belt has moved.

In addition, an “E” for English miles or an “M” for metric kilometers will appear in the right side of the display. To change the unit of measurement, press the Speed in- crease button.

IMPORTANT: If a “d” appears in the display, the con- sole is in the “demo” mode. This mode is intended to be used only when the treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automati- cally appear in a preset sequence; the buttons on the console will not operate. If a “d” appears when the in- formation mode is selected, press the Speed de- crease button so the “d” disappears.

Note: If you press the Calorie Goal Programs button while in the information mode, the display may appear very dim, very dark, or blank. If this happens, press the Calorie Goal Programs button repeatedly until the dis- play looks right.

To exit the information mode, remove the key from the console.

19

Image 19
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. WLTL49806.0 Serial No Call TOLL-FREETable of Contents Important Precautions Page Back Right Side Before YOU BeginTighten the Wheel Nut the Wheel should turn Freely AssemblyScrews are in the indicated holes Base Tighten the Upright Bolts yet Upright Bolts yetFrame Bolt yet Outer side of the Frame Spacer facing33, and a Nut 47 do not tighten the Frame Bolt yet Start all four Handrail Bolts before tightening Any of them Sembly. Make sure that no wires are pinchedSide View View from Above BoltsBase Cover not shown in the same way HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to Turn on the Power HOW to USE the Manual Mode Whenkey. you are finished exercising, remove Always exercise at a pace that is comfortable for youMeasure your heart rate if desired Turn on the fan if desiredSelect a distance program HOW to USE a Distance ProgramPress the Start button to start the program When the program is completed, remove Key from the console HOW to USE a Step ProgramSelect a step program HOW to USE a Calorie Goal Program Information Mode HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Exercise Frequency Conditioning GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. WLTL49806.0Remove this Exploded Drawing and Part List from the Manual R1006A Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT