Weslo WLTL49806.0 user manual Assembly, Tighten the Wheel Nut the Wheel should turn Freely

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner.

Assembly requires the included hex keys

and your own phillips screwdriver

, rubber

mallet

, adjustable wrench

, and needlenose pliers

.

To identify assembly hardware, see the drawings below. The number in parentheses below each drawing is the key number of the part, from the PART LIST in the center of the manual. The number following the parentheses is the quantity used in assembly. To avoid damaging plastic parts, do not use power tools for assembly.

Silver Ground

3/4" Screw (2)–14

Base Pad Screw (92)–4

 

 

Screw (11)–2

 

 

 

1/4” Star Washer

 

 

 

 

 

 

 

Nut (47)–2

(21)–2

 

 

 

 

Upright Bolt (27)–4

Wheel Nut (35)–2

 

 

 

 

 

 

Wheel Bolt (14)–2

 

 

Handrail Star

 

 

Washer (19)–4

 

 

Console

Frame Washer

 

 

 

Bolt (22)–2

(33)–2

 

 

Frame Bolt (32)–2

 

 

 

 

 

 

Wheel Spacer

Upright Star

 

Handrail Bolt (20)–4

 

(44)–4

Washer (39)–4

1. Attach a Wheel (45) to one side of the Base (48)

1

 

45

with a Wheel Bolt (14), two Wheel Spacers (44),

 

 

 

 

and a Wheel Nut (35) as shown. Do not over-

45

92

 

tighten the Wheel Nut; the Wheel should turn

44

 

44

 

 

freely.

Hole

37

 

 

92

Attach the other Wheel (45) to the other side

35

 

 

 

 

48

 

 

 

 

of the Base (48) in the same way.

14

37

 

Attach the four Base Pads (37) to the Base (48)

Hole

92

 

 

 

with four Base Pad Screws (92); make sure that

 

 

 

 

 

the screws are in the indicated holes in the

 

 

 

Base.

 

Hole

37

 

92

 

Hole

 

 

 

 

 

 

37

 

 

6

 

 

Image 6
Contents Call TOLL-FREE QUESTIONS?Model No. WLTL49806.0 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Before YOU Begin Back Right SideAssembly Tighten the Wheel Nut the Wheel should turn FreelyScrews are in the indicated holes Base Upright Bolts yet Tighten the Upright Bolts yetOuter side of the Frame Spacer facing Frame Bolt yet33, and a Nut 47 do not tighten the Frame Bolt yet Sembly. Make sure that no wires are pinched Start all four Handrail Bolts before tightening Any of themBolts Side View View from AboveBase Cover not shown in the same way Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Turn on the fan if desired Always exercise at a pace that is comfortable for youMeasure your heart rate if desired Whenkey. you are finished exercising, removeHOW to USE a Distance Program Select a distance programPress the Start button to start the program HOW to USE a Step Program When the program is completed, remove Key from the consoleSelect a step program HOW to USE a Calorie Goal Program Information Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. WLTL49806.0 Key No. Qty DescriptionRemove this Exploded Drawing and Part List from the Manual R1006A HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT